|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
04-21-2008, 05:50 PM
| #1 (permalink) |
| Canuck  Join Date: Nov 2007 Location: Ottawa, On.
Posts: 205
   | PGP feeding problems The paintballs won't drop from the feed tube into the barrel on my PGP. I took the bolt out and it still won't go, they get stuck half way. Judging by the way the ball wobbles back and forth it looks like it's getting stuck here.  How can I fix this? I have files and sand paper should I just try filing the inside down?
__________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt |
|  |
|
04-21-2008, 06:02 PM
| #3 (permalink) |
| MCB Member  Join Date: Mar 2006
Posts: 802
| i agree with the above post, also verify the paint isn't swollen at all.
__________________ My website with Vintage Hard to Get Parts for Sheridan, Crosman, WGP, Tippmann, Nelson http://www.rcpaintball.com My Gallery http://www.mcarterbrown.com/gallery/...ser=87&cat=500 Feedback Ebay - http://feedback.ebay.com/ws/eBayISAP...me=STRK:ME:UFS Mcarterbrown - Uhttp://www.mcarterbrown.com/forums/f...-feedback.html |
|
| |
|
04-21-2008, 06:13 PM
| #4 (permalink) |
| Canuck Join Date: Nov 2007 Location: Ottawa, On.
Posts: 205
| No bolt, no feed plug nothing. It goes in half way and sits there and if I move the gun back and forward it wiggles. I also tried two diff brands of paint. I guess Canadian paint is bigger. It is very humid here. Filing is slowly helping.
__________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt |
|
| |
|
04-22-2008, 06:09 PM
| #5 (permalink) |
| bringing back the dead  Join Date: Jan 2007 Location: pensacola, florida
Posts: 867
| i had a similar problem with one once, almost like one side of the breech wasn't milled completely, i used a micro flathead screwdriver to slowly scrape the side of the breach from the other side...took a little time but it worked...and it was a well used marker!
__________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out... |
|
| |
|
04-22-2008, 08:14 PM
| #6 (permalink) |
| Canuck Join Date: Nov 2007 Location: Ottawa, On.
Posts: 205
| Good idea ill give that a try my current method with the dremel isn't working well, it's not grinding down the right spot.
__________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt |
|
| |
|
04-22-2008, 09:49 PM
| #7 (permalink) |
| bringing back the dead Join Date: Jan 2007 Location: pensacola, florida
Posts: 867
| just like knocking out a dent, have to pass through the marker from the other side...could use a ball on a dremel if you have VERY steady hands...preferably a diamond ball, less material removed...
__________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out... |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
