How is this for stupid

Uranus · 05-04-2008, 09:51 PM

I just got my Kp2 back from chplnstone, but I can't find my bolt. In my haste to shoot it I tried to use the bolt from my LB. I now have a too short bolt stuck in my Kp. Any Ideas on how to get it out? the bolt is too short to reach the opening to remove it.

hank_k · 05-04-2008, 10:00 PM

How'd you get it in in the first place ?

funsi00 · 05-04-2008, 10:00 PM

Is the hammer pin jammed or the whole bolt stuck? Pics?

Harbinger[TG] · 05-04-2008, 10:05 PM

push it with a dowel?

c6quad · 05-04-2008, 10:27 PM

remove the trigger group and hammer and you should be able to reach the cucking lug from the bottom of the gun.

Uranus · 05-04-2008, 10:33 PM

This is as far forward as the bolt goes.

hank_k · 05-04-2008, 10:36 PM

is that a fixed lug, a screw in lug or a spring loaded lug ?

also, how did you get it in in the first place ?

Uranus · 05-04-2008, 10:52 PM

spring loaded

funsi00 · 05-04-2008, 10:56 PM

wooden dowel rod down the front of the barrel, while simutaneously(sp) have a screwdriver pushing the pin up. Or are you able to rotate the bolt right or left? If able, push pin up. Twist right or left to keep pin depressed. Then tap out with dowel rod. Should work depending on how wedged in the bolt is.

chplnstone · 05-04-2008, 10:56 PM

wow, it looks like it went in past the stop on the front portion of the bolt...most pmi speedbolts i've seen have a milled-in stop in the front portion of the bolt, basically the material just has a step up to a larger diameter just before the steel release pin...it may require force to 'pop' it back out...

05-04-2008, 10:00 PM	#2 (permalink)
hank_k For gits and shiggles Join Date: Jul 2007 Location: St. John's, NL Posts: 470	How'd you get it in in the first place ? __________________ Complaints Department Hours of operation: Mon - Fri 11:00am - 11:05am (closed between 11:01 and 11:04 for lunch) Sat - Sun 12:30pm - 12:31pm (weather dependant)

05-04-2008, 10:36 PM	#7 (permalink)
hank_k For gits and shiggles Join Date: Jul 2007 Location: St. John's, NL Posts: 470	is that a fixed lug, a screw in lug or a spring loaded lug ? also, how did you get it in in the first place ? __________________ Complaints Department Hours of operation: Mon - Fri 11:00am - 11:05am (closed between 11:01 and 11:04 for lunch) Sat - Sun 12:30pm - 12:31pm (weather dependant)

05-04-2008, 10:56 PM	#10 (permalink)
chplnstone bringing back the dead Join Date: Jan 2007 Location: pensacola, florida Posts: 866	wow, it looks like it went in past the stop on the front portion of the bolt...most pmi speedbolts i've seen have a milled-in stop in the front portion of the bolt, basically the material just has a step up to a larger diameter just before the steel release pin...it may require force to 'pop' it back out... __________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-04-2008, 10:00 PM	#3 (permalink)
funsi00 MCB Member Join Date: Jul 2006 Posts: 378	Is the hammer pin jammed or the whole bolt stuck? Pics?

05-04-2008, 10:56 PM	#9 (permalink)
funsi00 MCB Member Join Date: Jul 2006 Posts: 378	wooden dowel rod down the front of the barrel, while simutaneously(sp) have a screwdriver pushing the pin up. Or are you able to rotate the bolt right or left? If able, push pin up. Twist right or left to keep pin depressed. Then tap out with dowel rod. Should work depending on how wedged in the bolt is.