|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
05-05-2008, 07:40 PM
| #2 (permalink) | |
| GCGWCC  Join Date: Dec 2007 Location: Calgary AB Canada
Posts: 1,026
| There should be a 1/8 pin on the bottom end of the barrel assembly where it lines up with the trigger group. It will run perpendicular to the barrel itself. You just need to push that pin out and they'll separate.
__________________ Quote:
| |
|  |
|
05-05-2008, 08:09 PM
| #5 (permalink) |
| MCB Member  Join Date: Jan 2008 Location: SoCal
Posts: 208
| So I have a PMI-1 and now a full blue streak rifle and I am interested in fitting the PMI-1 into the stock. I have read up on the stickies but I'm still quite confused. What modifications are required in order to accomplish this? I see i will have to probably change up the hammer a bit, modify the trigger group to fit the lower valve tube, and correct the threads on the pmi-1 in order to attach the two peices with the screw. Is there anything I am missing? Thanks. -711 |
|
| |
|
05-05-2008, 08:19 PM
| #6 (permalink) |
| MCB Member  Join Date: Jul 2006
Posts: 378
| Rainman229 makes hammers for the conversion. Need to drill hole for trigger group mounting hole for pin like blue streak. Need to remove mounting lug from blue streak, drill hole in PMI valve body. I believe those are the three items. |
|
| |
|
05-05-2008, 08:31 PM
| #7 (permalink) |
| MCB Member Join Date: Jan 2008 Location: SoCal
Posts: 208
| Removiing mounting lug? I follow you on the pin and hole tap, and the hole in valve body for screw, but whats the mounting lug? Also, Should the front end of the trigger group be sanded to fit? thanks -711 Edit: Actually found out the trigger group fits without modification, just took some force... Last edited by 711; 05-05-2008 at 08:37 PM. |
|
| |
|
05-05-2008, 09:14 PM
| #8 (permalink) |
| bringing back the dead  Join Date: Jan 2007 Location: pensacola, florida
Posts: 866
| i've passed this link on to you already, yes? sheridan p-series to k-series conversion thoughts... the 'mounting lug' is the 1/4"-20 screw, washer, and rod coupling/nut that the stock screw screws into...usually they are installed in the p-series in place of the nutsert for the front trigger frame screw, requiring a new hole to be drilled in the stock...
__________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out... |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
