|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
05-15-2008, 06:53 PM
| #11 (permalink) |
| MCB Member  Join Date: Mar 2006 Location: Texas
Posts: 1,270
| iirc it is 5/32
__________________ Later, John My feed back: http://www.mcarterbrown.com/forums/s...ead.php?t=1021 Carter's Commando Texas Division: http://www.mcarterbrown.com/forums/c...-division.html |
|  |
|
05-15-2008, 06:57 PM
| #12 (permalink) |
| Rec Poster  Join Date: Dec 2007 Location: Savannah, GA
Posts: 70
| It has an velocity adjuster. Would cocker springs work? EDIT: i found the correct wrench for the bolt. Now it slides back and forth, now what? Apparently, It doesn't come with a velocity adjusting bolt. That bolt I unscrewed apparenly controlled where the BBs are. Didn't do anything to change velocity. Also, If I add any more shims to the RVA, It won't cock. Last edited by Aim for the trash; 05-15-2008 at 07:55 PM. |
|
| |
|
05-15-2008, 07:56 PM
| #13 (permalink) | |
| MCB Member  Join Date: Apr 2006 Location: NC
Posts: 3,944
| what slides back and forth? the set screw down in the bolt? that set screw should click and lock in place as you adjust it.
__________________ Quote:
| |
|
| |
|
05-15-2008, 09:02 PM
| #14 (permalink) |
| Newbie  Join Date: Apr 2006 Location: Vancouver, BC
Posts: 3,385
| It's a velocity adjustable bolt. Trust us and just screw that screw all the way in. Also, if you have a velocity adjuster, use it!! If you need more tension, take the RVA off and shim that spring!
__________________    Nelson Owner's Group / The PGP Owner's Group / My Gallery / My Feedback / Blackleaf Outfitters -Russ |
|
| |
|
05-15-2008, 09:30 PM
| #15 (permalink) |
| Seasoned Member Join Date: Nov 2006 Location: Montreal, Quebec, Canada
Posts: 528
| There should be 4 BBs in the bolt. 2 that lock the bolt fwd (the ones you should be able to see through the holes in the side of the barrel when the bolt is forward) 2 smaller BBs under the back o-ring on the bolt that act as detents for the velocity adjuster. Also, just to make sure we aren't all talking about different things here the velocity adjuster is accessed through the front of the bolt by putting the appropriate hex key down the air passage. The knob on the back of the bolt outside the gun isn't the velocity adjuster. The velocity adjuster screws out to partially block the air path up into the bolt. It should click every half turn & must be set in one of the clicked positions otherwise air will leak out through it.
__________________ Current markers: Automag powerfeed left. PGP w/some Palmer's love WDP Angel Speed 03 (bought for $100 & in need of some love (read: money I don't have) thrown it's way  ) Sheridan Piranha LB PMI-III Spyder Victor-II "Now is no time to be making new enemies" - Voltaire (When asked on his deathbed by a priest to renounce the devil and turn to God.) |
|
| |
|
05-15-2008, 10:15 PM
| #17 (permalink) |
| Canuck  Join Date: Nov 2007 Location: Ottawa, On.
Posts: 206
   | Is that pump arm made of brass?
__________________ Spyder Aggressor -- Palmer stab - milled for timmy bolt Automag -- ULE body - Q-loader - Logic 90° frame Pump Autococker -- Palmer Fatty stab - WWA pump kit PGP -- Kframe - Quick Changer - CooperT Bolt |
|
| |
|
05-15-2008, 11:23 PM
| #19 (permalink) | |
| MCB Member  Join Date: Apr 2006 Location: Bean Town, U.S.A.
Posts: 2,719
| Quote:
As for velocity... The Demon bolt, as it is called? Sucks. Have PPS put one of theirs and be done.
__________________ My Feed Back and album Norman Vincent Peale: "Believe that you are defeated, believe it long enough, and it is likely to become a fact. We tend to get what we expect." Carpe Diem | |
|
| |
|
05-15-2008, 11:40 PM
| #20 (permalink) | |
| MCB Member Join Date: Apr 2006 Location: NC
Posts: 3,944
| i don't really like the velocity adjustable Speed Demon bolts but the nonadjustable ones are nice bolts. the adjustable ones can be fixed to be as good.
__________________ Quote:
| |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
