GRRR! - Page 2

Schmitti · 06-25-2008, 04:38 PM

There is a little screw with a flat head... the head is shaped like a pringle chip (you know what I mean right?) so that it fits snug to the inside of the tube. The head goes on the inside of the barrel with the screw portion sticking out the bottom of the tube. You then thread the nut onto that.

E

Heebs · 06-25-2008, 04:57 PM

Quote:

Originally Posted by Schmitti

There is a little screw with a flat head... the head is shaped like a pringle chip (you know what I mean right?) so that it fits snug to the inside of the tube. The head goes on the inside of the barrel with the screw portion sticking out the bottom of the tube. You then thread the nut onto that.

E

Gotcha...

Now whats the easiest way to remove the trigger guard?

Schmitti · 06-25-2008, 05:00 PM

It may have two rivets holding it to the stock. From the inside of the stock, use a drill to remove the ends of the rivets holding the guard to the stock.
Replace the rivets with long screws and appropriately sized washers and nuts.

E

Heebs · 06-25-2008, 05:08 PM

Thanks E.

Can you also tell me the screw specs for the screw that goes into the pringle screw mount? I really dont want to haul the KP to the hardware store tomorrow.

Schmitti · 06-25-2008, 05:17 PM

Gah... no can do, mine has been replaced with something beefier and I sold the screw/nut a while ago.

E

Heebs · 06-25-2008, 05:33 PM

Ugh...

Cornstar didnt even include the correct length 12 gram plunger... ugh.

funsi00 · 06-26-2008, 09:33 AM

I believe stock to body screw is 1/4-20? I will have to double check.

chplnstone · 06-28-2008, 02:24 AM

yup, 1/4-20x1"...

Gazoo · 06-30-2008, 09:50 PM

osCommerce
Fastener screw

06-25-2008, 04:38 PM	#11 (permalink)
Schmitti Out and about Join Date: Apr 2006 Location: Schen. NY	There is a little screw with a flat head... the head is shaped like a pringle chip (you know what I mean right?) so that it fits snug to the inside of the tube. The head goes on the inside of the barrel with the screw portion sticking out the bottom of the tube. You then thread the nut onto that. E __________________ Gone fishing

06-25-2008, 05:00 PM	#13 (permalink)
Schmitti Out and about Join Date: Apr 2006 Location: Schen. NY	It may have two rivets holding it to the stock. From the inside of the stock, use a drill to remove the ends of the rivets holding the guard to the stock. Replace the rivets with long screws and appropriately sized washers and nuts. E __________________ Gone fishing

06-25-2008, 05:08 PM	#14 (permalink)
Heebs Go Cardinals! Join Date: Feb 2007	Thanks E. Can you also tell me the screw specs for the screw that goes into the pringle screw mount? I really dont want to haul the KP to the hardware store tomorrow. __________________ Heebs Feedback WTB: ATS Mags - PM me. Mac Dev LE Droid ON SALE

06-25-2008, 05:17 PM	#15 (permalink)
Schmitti Out and about Join Date: Apr 2006 Location: Schen. NY	Gah... no can do, mine has been replaced with something beefier and I sold the screw/nut a while ago. E __________________ Gone fishing

06-25-2008, 05:33 PM	#16 (permalink)
Heebs Go Cardinals! Join Date: Feb 2007	Ugh... Cornstar didnt even include the correct length 12 gram plunger... ugh. __________________ Heebs Feedback WTB: ATS Mags - PM me. Mac Dev LE Droid ON SALE

06-26-2008, 09:33 AM	#17 (permalink)
funsi00 MCB Member Join Date: Jul 2006	I believe stock to body screw is 1/4-20? I will have to double check.

06-28-2008, 02:24 AM	#18 (permalink)
chplnstone bringing back the dead Join Date: Jan 2007 Location: pensacola, florida	yup, 1/4-20x1"... __________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out...

06-30-2008, 09:50 PM	#19 (permalink)
Gazoo Active Member Join Date: May 2007 Location: Forest Lake MN	osCommerce Fastener screw __________________ I am just a figment of your imagination.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search