mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Sheridan (http://www.mcarterbrown.com/forums/sheridan/)
-   -   E Rex problems (http://www.mcarterbrown.com/forums/sheridan/77441-e-rex-problems.html)

LGorton 05-10-2009 09:30 AM

E Rex problems
 
Hey Guys,
I just aquired an Erex and am having an issue with it.
I put a new battery in it, led powers up but no response from the trigger. If I had to guess, id say there is something wrong with the solenoid. If I take the grips off, I can manually trip it to cock and decock but when i pull the trigger nothing happens. I noticed there is a small hole on the rear of the upper grip frame and the grip is notched out but there seems to be a screw missing. Anybody have any ideas what might be going on here? Any help would be greatfully appreciated. Thanks in advance. Also Looking for a manual for this marker......

strider 05-11-2009 12:39 AM

Don't think you will get a lot of assistance here in the brass section. Could be wrong.

DamoNAN 05-11-2009 11:28 AM

I think the E Rex is the first version of the Black Dragun, which was made by Game Face/M3/Dragun Empire. It was basically a Kingman Spyder clone. I would try the Kingman forum.

The hole in the trigger frame is a sear adjustment screw. It lets you adjust the amount of of contact between the sear and the hammer.

LGorton 05-11-2009 10:41 PM

thanks for the info! I posted here first because it was under the Sheridan heading but then found the ask the experts tab. again, thanks for the input, ill check the Kingman forum.......:)

LGorton 05-13-2009 07:59 PM

got it working, thanks guys


All times are GMT -4. The time now is 05:36 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC