![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
|
![]() |
| | LinkBack | Thread Tools | Search this Thread |
| | #1 (permalink) |
| Active Member | PGP wont cock all the way
My PGP only cocks the second the degree, and it just happened when I was fooling around with it today. To be more specific, it doesnt cock where the bolt clears. Any help is appreciated. Thanks!
__________________ WTB halfblock bodies w/internals $95 |
| | |
| | #2 (permalink) |
| For gits and shiggles Join Date: Jul 2007 Location: St. John's, NL |
... do you mean only the bit the pump arm connects to goes back, or the hammer doesn't catch when you pump back ? The former is an issue with the pin that comes down from the bottom of the bolt, the latter is most likely an RVA that's in too far or an issue with the pin that comes off the bottom of the hammer
__________________ Complaints Department Hours of operation: Mon - Fri 11:00am - 11:05am (closed between 11:01 and 11:04 for lunch) Sat - Sun 12:30pm - 12:31pm (weather dependant) |
| | |
| | #3 (permalink) | |
| Active Member | Quote:
__________________ WTB halfblock bodies w/internals $95 | |
| | |
| | #4 (permalink) |
| 6.5x50 Join Date: Apr 2006 Location: Yorktown, Virginia | Screw out the cocking lug on the bolt a little bit, so it catches the hammer.
__________________ Currently Sporting a letter of Marque from the Evangelical Pagans of Valhalla, Annwnn, and the Wild Hunt. Where let us carve up a goat or swine in friendship, while partaking in much good beer is a polite greeting. You can't be a real country unless you have a beer and an airline. It helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer. Frank Zappa "Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut." -Ernest Hemmingway "He was a wise man who invented beer." -Plato My Feedback Thread |
| | |
| | #6 (permalink) |
| 6.5x50 Join Date: Apr 2006 Location: Yorktown, Virginia | ![]() #25 on the illustration is the cocking lug. It is what you need to screw out so it catches on the cocking lip of the hammer. To remove the bolt you need to remove grip handle #46 and mainspring plug #27, pump rod #31 from the bolt then pull the bolt back enough that the cocking lug lines up with one of the holes on the right side of the valve tube. Once you do this rotate the bolt so that the bottom of cocking lug is sticking out. Once you do this just unscrew it enough that it catches the hammer.
__________________ Currently Sporting a letter of Marque from the Evangelical Pagans of Valhalla, Annwnn, and the Wild Hunt. Where let us carve up a goat or swine in friendship, while partaking in much good beer is a polite greeting. You can't be a real country unless you have a beer and an airline. It helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer. Frank Zappa "Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut." -Ernest Hemmingway "He was a wise man who invented beer." -Plato My Feedback Thread |
| | |
| | #7 (permalink) |
| For gits and shiggles Join Date: Jul 2007 Location: St. John's, NL |
worth nothing that that isn't a PGP, but al the bits are essentially the same, so no worries (edit: no worries to mayor) just to be even more clear, when you push the pump handle back, do two things go back and come forward or does only one thing go back ?
__________________ Complaints Department Hours of operation: Mon - Fri 11:00am - 11:05am (closed between 11:01 and 11:04 for lunch) Sat - Sun 12:30pm - 12:31pm (weather dependant) |
| | |
| | #10 (permalink) |
| Making moves since '03 Join Date: Dec 2008 Location: Denver, CO |
could the rva/end cap be screwed in too far? i know on 2k1 pgp's sometimes if the rva is screwed in to line up the wrong grip frame hole it can prevent the gun from re-cocking properly
__________________ Yesterday I dared to struggle. Today I dare to win. -Bernadette Devlin My Feedback: http://www.mcarterbrown.com/forums/f...rick_18-a.html |
| | |
![]() |
|
| Thread Tools | Search this Thread |
|
|