|Sidearms Bring on the Pistols! From Splatmasters to modern day semi-auto pistols.|
| ||Thread Tools||Search this Thread|
|11-27-2012, 08:21 PM||#2 (permalink)|
Not an easy way like with the T8.1
I have had an idea for something like this that I want to try:
1. Cut a hole through the back of the grip
2. Install some custom macro line and air fittings to replace the nipple that goes into the mag
3. Attach that macro line to a remote nipple that is fixed to the hole you cut at the back of the grip
4. If you remove the CO2 valves from the mags there is enough room for that new air lines.
If someone could validate that concept for me I might actually try it
|11-28-2012, 08:14 AM||#3 (permalink)|
Join Date: Mar 2011
Location: Nr Leeds, North Yorkshire England(UK)
I have had similar thoughts of doing the same thing with my T9 but don't have a clue where to start! BUt I think it could be done. It would probably require a custom part to fit in the nipple thread though.
|11-28-2012, 10:33 PM||#4 (permalink)|
It's All In The Reflexes.
|11-29-2012, 12:33 PM||#7 (permalink)|
Join Date: Sep 2012
with all the requests for a remote line adapter for the T8 some one should make a back block that has a relief valve and air nipple built in. As for regulating the pressure that can be done from a asa/regulator on the tank (ex: the Empire Axe Relay). Run a remote from that and WHAMMY you got your self a remote line set up.
On Tech PB and Tiberius Arms as Soldier of Fortune
|Thread Tools||Search this Thread|