mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Smart Parts / GOG (http://www.mcarterbrown.com/forums/smart-parts-gog/)
-   -   Multicam eNMEy (http://www.mcarterbrown.com/forums/smart-parts-gog/232571-multicam-enmey.html)

Gadget_ 05-01-2013 03:26 PM

Multicam eNMEy
 
Decided to pimp my ride a bit and de-rubberised the eNMEy then sent it off for some hydro graphics, really pleased with the results.

http://www.chimpy.com/misc/mcam.jpg

and a before shot for comparison:

http://www.chimpy.com/misc/before.jpg

Mr. Hick 05-01-2013 03:38 PM

That looks AWESOME. well done, sir.

DAVID(GEN) 05-01-2013 03:41 PM

How did you get the rubber off... just pulled it off?

desertT1 05-01-2013 03:42 PM

That looks awesome! Curious about the durability on the plastic (and smooth/shiney) body.

Gadget_ 05-01-2013 03:49 PM

Quote:

Originally Posted by Mr. Hick (Post 2698397)
That looks AWESOME. well done, sir.

Thank you :)

Quote:

Originally Posted by DAVID(GEN) (Post 2698403)
How did you get the rubber off... just pulled it off?

Yep it just pulls off....but leaves loads of residue behind which you have to pick off and then you discover that the glue they used leaves a pitted/scarred surface behind where it partially melted the plastic of the body. Took me a couple of hours to polish all the marks out using some CIF liquid as a mild abrasive (sandpaper just scuffed the plastic up).

Quote:

Originally Posted by desertT1 (Post 2698404)
That looks awesome! Curious about the durability on the plastic (and smooth/shiney) body.

Thanks - only just got it back today, so no sure about the durability. Feels pretty robust, but time will tell! Added the reg grip specifically to avoid me wearing away the coating on the reg.

Menso 05-01-2013 03:51 PM

Quote:

Originally Posted by DAVID(GEN) (Post 2698403)
How did you get the rubber off... just pulled it off?

Yeah, how is the plastic secured to the gun? Where did you send it to get painted? How much did it cost? I want to do this.

Mar 05-01-2013 03:54 PM

thats dope! I would pay $$$$ for that!11

henchman 05-01-2013 05:32 PM

Very nice.
Btw, after removing the rubber, sanding will remove the pits faster. Starting with 100 and working up to 1500 grit. Finishing with polish.

mpsd 05-01-2013 05:47 PM

Sorry to ask but how much is it to have a paintgun hydroed like that? Looks awesome, by the way.

henchman 05-01-2013 05:50 PM

Seriously. These guns rock.
People are pretty surprised when they realize they are $129


All times are GMT -4. The time now is 06:37 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC