Paintball

[druid]

I cannot accept responsibility for creating this list.
It's the work of Chiumanfu...an absolute PLUTHORA of knowledge and uber-tech weenie. The original list missed some manufacturer links and I added them so they were available.
All the brand names are clickable links. Some seem omited but there are other products by the same manufacturer. Refer to other products of the same manufacture for their website.

Another note is that it seems some of the manufacturer links are dead. There are some that I substituted a store link instead. All links were acquired from PBReview.com.

______________________

ENJOY!! and happy hunting!
______________________


Boards

Lucky Paintball Stage 4 w/MAC noid - Available now
Modes - NPPL Semi, PSP, CFOA, NXL, Millenium, Response, Full Auto, Breakout Semi, Breakout Ramp, Ramp, Burst, Training, Demo.
Settings - Dwell, ABS dwell, ABS Time, Eye sens, Ramp Activation Time, Ramp Activation Shots, Ramp Disable time, Mech Debounce, Elec Debounce, Bounce Limiter, MROF w/eyes, MROF wo/eyes
Features - Eye fault recovery, 15 min power saver, Instant on, Tourney lock, Membrane pad adapter.
Max ROF - Unlimited
Notes - Available with or without MAC noid or SP noid.
Manual - http://www.lucky-paintball.com/ionspitfire.pdf
MSRP - $79.99 without solenoid / $99.99 with SP solenoid / $119.99 with MAC solenoid.

Tadao Raider Ion Board - Available now
Modes - Unlimited Semi, Adjustable Semi, PSP Autoresponse, PSP Soft Ramping, PSP Hard Ramping, PSP Z-Burst, NXL Fullauto, Auto Response, 50% Ramping, Max Ramping, Z-burst, Full Auto
Settings - Debounce, Dwell, Loader Delay, AMB, ABS, ROF, CFP, Ramp Start, Gangster mode, Pulse Dwell, Dwell Percentage
Features - More than 1 billion unique ways to adjust settings, 36 different "breakout" style modes, 7 color LED, Instant On, Headers for Power switch and LED membrane pad compatible, Battery saving software.
Notes - Lifetime warranty against defects.
Manual - http://www.tadaotechnologies.com/dow...Ion_Manual.pdf
MSRP - $140 includes solenoid and grip panel settings sticker.

Advanced Paintball Electronics Rampage Ion Board - Available now
Modes - Semi auto, Burst, Reactive, Full auto, PSP3, NXL, 2 fully programmable Ramping modes, Trainer.
Settings - Trigger Debounce, Trigger Buffering, Solenoid Dwell, Solenoid Dwell Modulation, Breech Load Delay, Bolt Return Delay, iFault™ Control, Auto Shutoff Timer, Lightbar Modes, all ramping related settings.
Features - Advanced keypad with 4 LEDs and 3 buttons. Extremely adjustable.
Notes - Lifetime warranty available for $9.95.
Manual - N/A
MSRP - $129.95 includes solenoid and membrane keypad.

Virtue Ion Board - Available now.
Modes - Semi Auto, Full Auto, PSP Ramping, NXL Full Auto, Breakout, Ramping, Auto Response
Settings - Dwell, ROF, Debounce, Dwell, Eye Sensitivity, Anti Bolt Stick, Anti Mechanical Bounce, Ramp Activation Rate, Ramp Percentage
Features - Programming through trigger, Instant on, Tourney lock, Membrane pad header.
Max ROF - Unlimited
Notes - Lifetime warranty and software updates,
Manual - Click the Tech Tab on this page
MSRP - $139.99 / 169.98 with membrane pad

Scenario Dreams T-Board - Available now
Modes - NPPL Semi, Reactive Trigger, 3 Round Burst, Full Auto, Millennium, Nitro, PSP Ramping, NXL Auto
Settings - ROF, Dwell, Debounce, Eye Delay, Force Semi, Shot Qing, After Nitro, Ramp Activation Speed, Shot to Ramp
Features - Eye alignment tool, Membrane pad header, Free software upgrades for life, RGB Led, 15bps lock, Tourney lock, Instant on
Max ROF - Unlimited
Notes - Available with or without noid. Lifetime warranty against defects and 30 days money back gaurantee.
Manual - http://www.scenariodreams.com/manuals/ion_manual.htm
MSRP - $54.99 without solenoid / $79.99 with solenoid / $89.99 with solenoid, membrane pad and adapter

Smart Parts Blackheart - Available Now.
Modes - Semi Auto, 3 Shot Burst, NXL Full Auto, Rebound (PSP Ramping)
Settings - Dwell, ROF, Mode, Debounce, Anti Bolt Stick, Kick-in Rate, Sustain Rate, Activation Rate, 14.7bps Shortcut Key
Features - Speaker for easy settings adjustment, Battery-saving software, Low battery alert, Nickel plated solenoid components.
Max ROF - 20bps
Notes - Needs modification to be compatible with VP scythe trigger (Prostar Scythe is ok), Incompatible with the Critical RPM Trigger
Manual - http://www.smartparts.com/Manuals/Bl...rt_Upgrade.pdf
MSRP - $125.00


Scenario Dreams JDMOTO Eyes - Replacement for the eye board. Available in red, blue, green, yellow, orange and white.

LuckyPB Replacement Eye Board - Replacement for the eye board. Uses visible red, white, blue, orange or green LED.

Virtue Ion Laser Eyes - Replacement for the eye board. Uses visible red, blue or green LED.

Virtue EzOn - This is a replacement On/Off sticker on your Ion's frame. This makes turning your Ion off and on easier, and adds to the look. Comes in different colors.

Chiumanfu's Ion Mods - DIY mod kits for the Ion.

Triggers

Deadlywind FingerLock trigger - Unique ID bearing clamping method provides truely zero slop. Includes screw in trigger pin, magnet and backstop screw.

TechT Sabre Trigger - Sealed swiss ball-bearings. Three way adjustable.

TechT Stinger Trigger - Sealed swiss ball-bearings. Three way adjustable.

Prostar Violent Series ION Scythe Trigger - Updated VP Scythe. Same as the old favorite except it is now compatible with Blackheart Boards

Acid Customs triggers - Makes custom shaped triggers according to your specifications.

Warrior Ion 3 Point Magnetic Trigger - Subtle scyth design. Dual ball bearings. Anodised aluminum. Many colors available. Three way adjustable.

APE Rampage Trigger - Black anodized aluminum double trigger. Dual ball bearing. Magnetic return. Four way adjustable.

SIC Ion Trigger - Dual bearings, lightwieght delrin material, three way adjustable trigger (switch activation point, rear travel stop, and trigger angle), two removable magnets, includes quick removal trigger pin.

Critical RPM Trigger - Dual flanged ball bearings, lightweight scythe design, unique adjustable reverse polarity magnetic return using the included capacitor clip, four way adjustable trigger (magnet tension, switch activation point, rear travel stop, and trigger angle), Critical Pro-Pin which replaces the stock dowel pin, available in polished black, red and blue.
Note: Incompatible with the SP Blackheart board

New Designz Triggers - Comes in aluminum or composite in many different colors. 3 styles to choose from Blade, S-treme or Wave. Comes with or without roller bearings. Dual bearings on the roller models make for a very smooth and fast pull. Most adjustable trigger available.

Custom Products Sling Blade Roller Trigger - Sling blade (scythe) style trigger that pivots on a roller bearing. Ultra smooth and fast pull. Fully adjustible. Made from aluminum and comes in multiple colors. Install can be difficult if not mechanically inclined.

Custom Products Blade Roller Trigger - Blade style trigger that pivots on a roller bearing. Ultra smooth and fast pull. Fully adjustible. Made from aluminum and comes in multiple colors. Install can be difficult if not mechanically inclined.

Shocktech Ion Dual Roller Bearing Trigger - Aluminum. Fully adjustable. Many colours available.

Violent Products Ion Scythe Trigger - Made from acetone. Very high quality flanged ball bearings. Two-way adjustable. Removable magnets to adjust return strength. Ergonomic design. Ultra smooth pull with virtually no play.
Note: Needs modification to be compatible with the SP Blackheart board

ANS Ion roller Trigger - Two-way adjustable. Single roller bearing. Multiple colors available. Aluminum.

Trinity 06 Ion Rolling Trigger - Two-way adjustable. Single roller bearing. Multiple colors available. Aluminum.

The Better One Delrin Trigger - Comes in 2 different styles. Wider and stronger than the stock trigger. Improve magnet setup. Two-way adjustable. Comes in either black or white delrin. (Link is dead)

Fireball Mountain Delrin Trigger - Comes in Wave or Original. Two-way adjustable.

Strange Gear Ion Trigger - Aluminum. Mulitiple colors available. Two-way adjustable.

Body Shells

Deadlywind Negative Ion Shell - Aluminum shell. Extensive milling. Bolt out back feature allows removing the bolt without disassembling the marker.

Lucky Stage 5.1 Body - A full replacement for the firing assembly and shell. All Stage 5's come with cocker threaded breech, feedneck, rear cap, laser eyes, ball detents, eye cover, Stage 1 V4 bolt (all aluminum), Stage 2 and 3 built-in. Comes in 3 milling patterns with a few limited edition runs. NOTE: This body is AUTOCOCKER threaded.

Xtremez CORE Breakout Body - Aluminum shell. Nice milling. 4 colors.

Punishers Ion Body - Aluminum shell. Features punishers skull and logo milling. Many colors.

Shocktech Ion Body - Aluminum shell. Really nice milling and colours. Simple one screw Bolt out the Back feature.

Special Ops Blackcell Ion Body Kit - Mil-sim body. Lots of options and accessories. Composite shell.

Warrior Ion Tactical Force Body - Mil-sim body. Aluminum. Lots of mounting 30mm rails. 8 ounces

New Designz Ion Body - Aluminum shell. 4 styles to choose from. Nice milling and colours. Less than 16oz.

Deadlywind Foehn - Aluminum shell. Bolt Out the Back feature allows bolt removal without disassembling the marker. 6oz

Deadlywind Isaria - Carbon Fiber shell with an aluminum exoskeleton and a delrin tail plug. Available with or without carbon fiber reg cover. 3.9oz

Deadlywind StinkOps DTI2 "Tactical" aluminum Ion body shells - Shell for the mil-simer. Covered in "Picatinny" style rail mounts for any accessory you can thing of. Feedneck screws directly into the shell. Includes M98 shoulder stock mount.

Warped Sportz Dark Ion Body - Aluminum shell. Included clamping feedneck and QEV. Nice milling.

Strange Gear Ion Body Kit - Aluminum shell. Bolt Out the Back feature allows bolt removal without disassembling the marker.

Powerlyte 6.5 Ion Body - Aluminum shell. Light weight and simple. Cutouts in the front and top. Many colors and fades available. 4.6oz

Powerlyte 5.5 Ion Body - Aluminum shell. Light weight and simple. No cutouts. Many colors and fades available. 5oz

ANS Razor Ion Body - Aluminum shell. Many colours available. 6oz

Sanchez Machine Ion Body - Aluminum shell. Nice milling. Simple

Cougar River Flow - Carbon fiber shell. Multiple colours available. Nice sculpting and finish.

Fireball Mountain Kage ExoSkeleton - Aluminum shell. Includes rail and snatch grip. Custom annodizing available. 5.5oz

Fireball Mountain Tactical Ion Body - Aluminum shell. 2 ful length and one 3/4 length Picatinny rails. Dust olive or dust black.

Trinity 05 Ion Slim Body - Aluminum shell. Many colors and fades available.

Advance Concept Ion Body - Aluminum shell. Many colors and fades available.

Advance Concept PWN Ion Body - Aluminum shell. Many colors and fades available. 3.8oz

Trinity 06 Ion Sick Body - Same as the Advance Concept Ion Body

Trinity 06 Ion Pwn Body - Same as the Advance Concept PWN Ion Body

Airsoldier Products Ion Body Type 1 - Same as the Advance Concept Ion Body

Airsoldier Products Ion Body Type 2 - Same as the Advance Concept PWN Ion Body

Turbo Paintball Ion Fusion Profile Bodies - Aluminum shell. Black or olive.

Element Paintball Aero Ion Body - Aluminum shell. Many colors.

Sith Paintball Tactical Ion Body - Targeted towards the mil-simers. Available in Dust Black or Dust Olive. Picatinny style rails and back cap accepts Tippmann 98 stocks.

JC Ion Slim Jim Body - Plastic shell. Translucent colors. Light weight.

Ion PVC Body Blanks - PVC tubing milled and machined for a perfect fit. Ready for you to customize.

SPO Gear Ion Illusion Body Kit - Carbon fiber or snake skin. Replacment shells. Many colors available. Comes with reg cover and grips.

Smart Parts Ion Body Kit - Replacment shells. Many colors available. Comes with reg cover and grips.

Ion Store Decal Kit - Vinyl decal kits in many colors, camo, carbon fiber and chameleon. Covers the stock shell, reg cover and grips. NOTICE:Store owner has been MIA and is not shipping orders... although he is still taking payments. Do not place any orders till further notice.

Frames (Stock frame is 8.8oz)

Element V2 Frame - High quality grip frame with ergonomic shape, integrated rail, recessed membrane pad location and slot (includes jewel cover if you don't use a membrane pad), interchangeable ASA, gauge in the front, split trigger guard.

New Designz Scorpion Frame - Full featured grip frame with integrated rail, revised on/off button area, snatch grip, +/- 15* ASA optional, side adjust trigger pretravel and recessed screws. 6.8oz

Punishers Grip Frame - Full featured grip frame with integrated dovetail rail-mount, larger trigger guard, screw access through trigger guard and rear hump on 45 frame for more comfort. Available in 15* or 90* asa, basic or "Punishers" milling and many colors.

ANS Ion 90 Degree Trigger Frame - Vertical grip frame. Includes ANS roller trigger. Many colours available.

Element Paintball 85 Degree Frame - Vertical grip frame. Changeable ASA for different angles. Custom annodizing available. No longer manufactured.

Sith Ion Grip Frame - 45 grip frame with Ton Ton inspired ergonomic grip. Changeable ASA for different angles. Many colors available.

Fireball Mountain Fierce Frame - Many colors. Membrane pad ready. 90* or 15* or -15* ASA options. Built in rail. Gauge on either side. 7.4oz

Stock Regulator Covers

Deadlywind CF Reg Cover - Carbon fiber sleeve. Made of 2x2 twill smooth satin sanded surface and includes misc mounting hardware.

Warrior Ion Reg Cover - Aluminum sleeve. Red, blue, silver, black and black dust.

Trinity Bad Habitz Ion Slim Grip - Aluminum sleeve. Red, blue, silver, black and yellow.

New Designz Regulator Sleeves - Aluminum sleeve. Alien, diamond and vortex designs. Red, black, blue, silver.

Smart Parts Ion Locking Cap - Allows a player to quickly lock in a pressure/velocity setting to keep the ION legal in any tournament, regardless of the rules.

Bolts (Stock bolt is 32.9 grams)

New Designz Ion Skeleton Bolt - One piece aluminum. Double tail oring. Teflon impregnated hardcoat finish to reduce friction. High flow. 10.5 grams

TechT Paintball L7 Bolt - Tailess aluminum bolt with composite boltstop. Teflon impregnated surfaces and a large free-flowing face. Back plug increases the firing chamber volume. 8.5 grams

Lucky Stage1 V3 - One piece polymer construction. Milled bolt face prevents roll-back. Uses a rear bumper and special top hat bolt stop to allow for faster bolt cycling. 14.7grams

Trinity Sick Ion Bolt - One piece aluminum. Dual tail orings. 18 grams

Warrior Ion SL Bolt V2 - One piece aluminum. High flow. Large bolt face. Double tail orings seal the dump chamber when the bolt is forward. V2 is strengthened to prevent snapping. 16 grams

Redz Ion Bolt - One piece aluminum. High flow. Large bolt face. Double tail orings seal the dump chamber when the bolt is forward. 21.5 grams

Shocktech Ion Superfly Bolt - One piece aluminum. High flow. Seals the dump chamber when the bolt is forward. Claims to be more consistant FPS.

Smart Parts Firebolt - 2 piece aluminum design. High flow. Larger bolt face. 16.8 grams

TechT Paintball L6 Bolt - Aluminum. High flow. Seals the dump chamber when the bolt is forward. Larger bolt face. 13.6 grams

New Designz ION Pro EQ Bolt - Less weight which results in less kick. Telfon treated aluminum bolt for even less friction and wear. 24.9 grams

Orange Paintball Unicorn Bolt - Carbon fiber and aluminum construction. High flowing, light weight. Seals the dump chamber when the bolt is forward.

Orange Paintball Unicorn-Nano Bolt - Tailess aluminum construction with a composite boltstop. New design changes the way the firing assembly operates. High flow and very small moving mass for less kick. 17.4 grams

Lucky Stage 1 Bolt - Lightweight composite material. High flowing. Discontinued due to high failure rate. You can still find some on eBay. 15.1 grams

Lucky Stage 1 Aluminum Bolt - Same as the composite bolt except made completely from aluminum. 29.5 grams

TechT Paintball Lightening Bolt - Aluminum. High flow. Seals the dump chamber when the bolt is forward. 19 grams

Firing Chamber

New Designz Ion Firing Can - ION Firing Can. Adds more volume, less weight and improves airflow. 12.7 grams less than stock. 4 colours.

Lucky Stage 2 Firing Chamber - Higher flow. Seals the dump chamber when the bolt is closed.
Note - Not compatible with old-style Orange bolt and Lightening bolt.

New Designz ION Swivel Donut - Replacement rear donut. Higher flow rate. 4 colours.

Lucky Stage 3 Rear Donut - Replaces the rear donut. Higher flow rate. Uses set screws instead of the c-clip. 4 colours.

Breech

New Designz AC Threaded Breech - Autoc0cker threaded breech. Comes with orings and detents. 4 colours.

Lucky AC Threaded Breech - Replaces the stock breech so you can use autoc ocker threaded barrels. Ion threads for the feedtube. 4 colours. Note: Killa Detents may not work.

Check-It Ion Full Breech Kit - Replaces the stock breech so you can use autoc ocker threaded barrels. Check It Sure Fit clamping feed neck with unique and reinforced threads. Milled front.

Sanchez Machine AC Threaded Breech - Reinforced threading on feedneck, No more stripped feedneck. Comes with clamping feedneck and Autoc0cker barrel threads.

Ball Detents

Lucky Ball Detents - Replaces your stock Ion ball detents with self lubing delrin detents and springs. Held in with tape. Works with stock and aftermarket breaches. Compatible with Stage 5 and Stage 5.1 bodies.

Kila Products Ion Reaction Detents - Adjustable magnetic force control. Non-wearing, low friction moving delrin pistons. Blowout proof. Avalable in black or orange.

New Designz Ion Spring Detents - Spring loaded for less force on the ball and less wear on the bolt. Comes in packs of 3.

Orange Paintball Ion Ball Detent Kit - Delrin detents. Interchangeable springs for adjusting detent force.

Barrels

*The ion accepts all impulse threaded barrels*

Barrel Kits with Inserts
Smart Parts Freak
Deadlywind Whisper
Empire Revolver
Powerlyte Scepter

Barrel Kits with Backs
Sly Carbon Barrel
Evil Pipe Kit
Stiffi Switch Kit
Hammerhead kit
Redz Pepper Stick

Barrel Adapters
Shocktech Barrel Adapter - Conveters Ion breech to barrels with Spyder threads.

Feednecks

Check It Products Sure Fit Feedneck - Secures loader using an allen key to tighten the feedneck.

Chipley Custom Machine Locking Feedneck - Secures loader using an allen key to tighten the feedneck.

Hybrid Technologies Hedlock - High rise feed for your marker. Features an adjustable collar to secure your loader. Compatible with ALL Loaders, no sanding or feed spacers needed.

New Designz Clamping Lo-Rise - This is a 4-O-Ringed twisting low rise locking feedneck. This feedneck is also available for the Halo loader.

Roughneck Paintball Adjustable Feedneck - This feedneck twists to lock the loader in place. It also is adjustable as to whether or not you want a high or low rise feedneck.

Smart Parts Twister Feedneck - Twist locking feedneck designed by Smart Parts.

Smart Parts Q-Lock - New feedneck design by smart parts. Swing clamping arm similar to that on bike seats.

Evil Smokestack -It increases the number of balls over the breech which will increases feed rate. It also will allow your gun to accept any hopper as well as adjusting to fit in any feed neck. Through a unique system of 3 tapered o-ring grooves you can create any combination to fit any gun and any hopper.

Tarantula Feed Tube - Feed tube engraved with tarantulas for the Impulse.

Function Clampin Feed Tube - Twister clamping feedneck designed by Function paintball products.

ShockTech Clamping Feedneck - Tighten with your fingers or and allen key.

Extreme Rage Clamping Feedneck - Twist clamp let's you attach or remove your hopper without tools. Very low cost!

Grips

Dye Sticky 3 - The Sticky 3 also offers full wrap design giving your frame a back strap cushion and filling your palm completely. This advanced molding technology provides you a secure anatomically correct fit with a soft shock absorption material.

Smart Parts Pro-Touch - Two-tone super soft grips contoured for the shooting hand. Fits .45 style grip frames.

32 Degrees Gel Rubber - This is a stylish and comfortable grip for any standard .45 grip frame.

Extreme Rage Rubber - This 45 style grip wraps around for a great feel. Fits all standard 45 frames with two holes.

Extreme Rage Timer - This 45 style grip wraps around for a great feel and now has a built-in game timer. Fits all standard 45 frames with two holes.

KAPP Aluminum 45 Panel - Replace those plastic plate covers with these hard anodized aluminum plates in cool colors!

ACI Phat Gel - This 45 style grip wraps around for a great feel. Fits all standard 45 frames with two holes.

Viewloader Sticky - Molded comfort clear gel, Improved grip and sticky feelFor 45 grip markers, Shock absorbing design.

Evil Rubber - This grip is not like all other rubber grips on the market. Well, it's real close if not the same, but this one comes with the very stylish Evil logo.

System X NME Grips - Have the same grips like the System X NME. This 45 style grip wraps around for a great feel. Fits all standard 45 frames with two holes.

Hybrid Technologies Panelz - Comes in variety of styles and colors. This 45 style grip wraps around for a great feel. Fits all standard 45 frames with two holes.

Regulators

***NOTE***ION accepts standard regulator threads ***NOTE***

AKA 2 Liter Tests have proven this reg to have a recharge rate of about 160BPS, no question the fastest on the market. A very high quality product from AKA, but it carries with it a hefty price tag.

Evolve Pi 2nd only to the Aka 2Liter. First of it's kind spool design is the first truely balanced reg on the market. That means that the supply PSI input coming from your tank will not effect the regulated output. The engineers at Evolve say it recharges at 60+ cps.

AKA Sidewinder Another high quality regulator from AKA. Comes in different lengths and is less pricey than the 2 liter.

Custom Products Reg Comes in 3 different lengths and many different colors. A great product that won't break the bank.

Macdev Gladiator Redesigned for 2004 the Gladiator reg is a very nice reg. Price compares to the 2 liter and break in time takes a little longer than most after market regs a very good reg nevertheless.

Evil Detonator A great reg with a low price tag. Performance according to the airsoldier tests is second to the 2liter. Air inlet is at the bottom for a cleaner looking bottom line.

Air America Messiah Quality at its finest but like everything else in the industry (besides the ion) quality comes at a high price.

Bob Long Torpedo Reg Same reg you will find on the intimidators comes in one length. Not as good as some of the others but not bad for the price.

Palmers Stabilizer This reg is without question one of the best on the market a great buy although some don't like the looks.

Dye Hyper Reg and [url=http://www.dyeprecision.com/Hyper Reg 2[/url] High quality product from dye good reg for the money. Nice milling.

****When It Comes To High End Regs Most Will Perform About The Same So Go For What You Think Looks Good, But Stock Reg Works Fine****
ASAs

Trinity Bad Habitz Push Button On/Off Unimount w/ Drop - Comes in various colors. Push buton On/Off w/ Bleed, will de-gas gun when you push On/Off to the off position, drop foward included.

Trinity Bad Habitz Drop Forward Uni-mount On/Off - Comes in various colors. Mounts onto any standard bottomline. The CAGE mounts onto the gun or drop forward. ON/OFF adapter features knurled cap for easy turning and a bleed hole to release the air stored in the line.

Trinity Bad Habitz Push Button On/Off Unimount - Same features as the regular On/Off, but with a push button.

System X 1.0 On/Off - Various colors. Fits all dovetail Drop Forwards. Easy On/Off Has three holes so you can configure your lines and gauges any way you want. NEED RAIL OR DROP FOWARD.

System X 2.0 On/Off - Same as v1.0, but with a smaller knob. NEED RAIL OR DROP FOWARD.

System X Slider Unimount Push Button On/Off Drop - Unique Push Button On/Off (no more knobs to fight with), will mount directly to gun, and will also fit dove tail drop forward, rails. Various colors.

Smart Parts On/Off Valve Shocker 03 - Will fit any dovetail, its short and compact. Easy twist on/off valve, with rebuild kit, works with both cO2 and Compressed Air, same on/off valve used on the popular Shocker 03. NEED RAIL OR DROP FOWARD.

WGP Torpedo Drop Forward On/Off - Comes with the on/off and screw in ASA. Perfect size for 68 and 70 ci bottles. This item is brand new, still in original packaging. This will fit on any standard two hole bottomline. Various colors.

Hybrid Technologies GRIND On/Off Push Button - Various colors. Push button activated. NEED RAIL OR DROP FOWARD.

Bob Long On/Off Drop Forwards for Slide Rails (Dovetail) - Fits all dovetail drops and grips. Has holes on both sides for any style configuration or to add your own gauge. Also features a on/off twist knob and a bleed hole for easy tank removal.

Check It Products Uni-Mount - The most versatile and convenient ON/OFF adapter available. Mounts onto any standard bottomline configuration. The Check It Uni-Mount CAGE mounts onto the gun or drop forward and holds the ON/OFF securely with 4 set screws. The Check It Uni mount ON/OFF adapter features knurled cap for easy turning and a Pressure relief system to dump the air stored in the line when your done playing.

Dye Air Port 05 On/Off - Made of high quality aluminum, On/Off is perfectly balanced for an easy twist, plug on both sides so you can choose which side your hose is going on.

New Designz EZ-Turn On/Off, Micro-Rail Combo w/Air Bleed-Off - Various colors. Comes with rail, and air bleed.

New Designz EZ-Turn On/Off w/Air Bleed-Off Ultra-Lite - Same as above. NEED RAIL OR DROP FOWARD.

Custom Products 2k5 On/Off ASA - This ASA use what we call "System Bleed" and "Virtual Resistance" Due to the fact that it has virtually no resistance at all while turning it on or off. System Bleed will bleed all the air from your tanks lines allowing you to easily remove your tank after degass. Various colors. NEED RAIL OR DROP FOWARD.

Custom Prodcuts On/Off Direct Mount ASA - Same as above, but doesn't need a drop or a rail.

Empire ASA On / Off Drop Forward - Only in black. On/Off so you can quickly shut your airflow off, to save precious air, standard dovetail mount. NEED RAIL OR DROP FOWARD.

Evil Drop On/Off Adapter - Evil On/Off Adapter fits any two hole bottomline gun or any dove tail drop forwards. Comes with Rail.

Shocktech Drop ASA On/Off - Bottomline ASA with On-Off adapter, mounts to dove tail rails, sleek looks like only Shocktech can do. NEED RAIL OR DROP FOWARD.

Phat On/Off Dovetail Drop Forward - It allows you to control when you want to air up or let out a little hot air. It has built in venting to allow the utmost in on / off technology, and it's simple to use - turn the knob to the right to engage the mechanics to air up your marker. Then ever so easily, turn the knob to the left to disengage the air cycling to the marker.

Function ASA With On / Off - Comes with Rail. Typical On/Off setup.

ProMark ASA On/Off - Typical On/Off setup. NEED RAIL OR DROP FOWARD.

KAPP K2 On/Off Adapter - This On-Off adapter fits on the Drop Zone Cradles and also all dove tail mounting rails. NEED RAIL OR DROP FOWARD.

AVI HSL On/Off Cradle Mount - Comes with Rail. Typical On/Off setup.

Warped Sportz Ion Drop Forward - Uses the stock asa to drop the tank forward.

Quick Exhaust Valves

***NOTE : The QEV is a simple valve...they will all perform the same.***

Smart Parts 360 QEV - QEV with a banjo type fitting. The only true drop in replacement for the Ion.

Airsoldier ION QEV kit - Uses clippard MEV-2. Includes a quick disconnect.

New Designz ION QEV kit - Uses clippard MEV-2. Includes a quick disconnect.

Lucky QEV Kit - Uses clippard MEV-2. Includes a quick disconnect.

Trinity ION Super QEV - Uses clippard MEV-2. Includes a barb fitting.

Eclipse DART QEV - Requires shaving the shell to fit properly. Comes in black or silver.

Virtue Ion QEV - Uses clippard MEV-2. Includes a quick disconnect. Lifetime warranty. Priced higher than the other identical Clippard qev's.

ANS QEV - Must purchase barb or qd seperately. Locking version will not fit without shaving the shell.

Paintball Geeks QEV Muffler - Attaches to the exhaust port to lower the sound signature of the qev.

Lucky QEV Gasket - A metal spacer and seal for Clippard style QEVs. Stop using teflon tape.

Miscellaneous

Smart Parts Oring Spares Kit - Oring replacement kit. Very complete.

Smart Parts Screw Kit - Screw replacement kit. Very complete.

Smart Parts Hose Kit - Hose replacement kit.

Trinity Oring Kit - Oring replacement kit.

Trinity Screw Kit - 3 frame screws, 2 grip screws, 2 asa screws.

TechT Ion 101 DVD - A complete maintenance video for the Ion. Packed full of great info, it's a must for beginner airsmiths.

Private Label Ions

Deadlywind Negative Ion Type-A - Semi-BOB aluminum shell with some pretty impressive milling, Fibur carbon fiber barrel, qev, Duress adjustable low-rise feedneck, FingerLock dual ball bearing trigger.

Maddog Ion - Aluminum Ion Body, 3 Point Adjustable Magnetic Roller Trigger, Clamping Aluminum Feed Neck, Aluminum Front Grip, Custom Products .689 2 piece 14" Barrel, Custom Products on/off ASA, Smart Parts Pro touch grip.

Punishers PB Ion - Punishers Logo Body, Punishers Logo Frame with built in talon grip, 90 or 15 degree ASA option, Punishers Regulator sleeve, Punishers Ion trigger, Freak Jr. barrel with .693 insert, Smart Parts On/Off, Smart Parts Q-Lock, Purchase of other upgrades installed at no additional cost upon request.

Dynasty Ion - This private label Ion comes in two versions, Base and Pro. On the Base, this Ion comes with Team Dynasty Body, Team Dynasty Grip, and a Team Dynasty Regulator cover. On the Pro, this Ion comes with Team Dynasty Body, Team Dynasty Grip, Smart Parts Q Lock, and an All American barrel.

Warped Sportz Dark Ion - Warped Sportz Dark Ion Body, Lucky 15 barrel, Function On/Off, Function Clamping Feedneck, Violent Productions Scythe trigger, Planet eclipse QEV. Very limited edition.

Trinity Sick 2006 Ion - Trinity Sick body 06, Trinity roller bearing trigger, Trinity T Lock feedneck, Trinity Eazy On/Off, Trinity slim grip, Trinity QEV, Trinity Revolution grips, Trinity accurate barrel. Many different colors, fades and camo patterns.

Smart Parts Ion Pro - Q Lock, Smart Parts Grips, Shocker style Drop with Twist On/Off, Freak barrel Jr. with .693 insert, and a Matching body kit and grip

ANS Razor Ion - ANS Trigger, ANS Body, ANS Frame, ANS QEV

Team Strange Ion - This private label Ion comes with Team Stange Ion body, and a Team Strange trigger.

SPO gear Illusion Ion - This Ion comes stock with some nice upgrades. It comes with a Lucky 15 barrel, PE QEV, SPO Gear Illusion body, and a Halo B with a matching shell

[Yankeeh8tr]

Nicely done Druid (& Chiu).................as usual.

[Phantom Flanker]

wow very nice... i wish i had this when i had an ion. im bookmarking it so i can use it as a reference.

[pizzaluvr]

Wow... Just wow..