| ||Thread Tools||Search this Thread|
|07-01-2014, 02:05 PM||#1 (permalink)|
Join Date: May 2013
Location: Uppsala Sweden
Feednecks that fit the STP
I got the Sterling Stock Class STP about a year ago and I am thinking of getting some uppgrades, regulator, on-off etc. And a clamping feedneck so has anybody gotten an aftermarket feedneck for a Stock Class STP and if so, which?
Since there are no threads my first thought was that any clamping feedneck would do but then I thought I might as well see if anybody has had the same idea.
Last edited by steeltoe; 07-01-2014 at 04:03 PM.
|07-01-2014, 04:22 PM||#2 (permalink)|
sex, pump and R'n'R
Join Date: Mar 2012
Location: Caen, Normandy
On mine, I use a Ion feedneck. But a Angel feedneck fits.
MCB feedback: http://www.mcarterbrown.com/forums/f...ml#post2459760
Ebay feedback: http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback
|07-02-2014, 10:59 PM||#4 (permalink)|
I took a feed neck and chucked it up in the lathe and cut the threads off it so it would fit my old STP .
I think Arrow either has one or was working on one too .
The devils Brigade
Its always better with a pump, and camo
|Thread Tools||Search this Thread|