| ||Thread Tools||Search this Thread|
|11-22-2013, 05:37 AM||#1 (permalink)|
Join Date: Feb 2013
Empire Relay Mod
Hey Super Stanchy,
Not sure if your aware but I'm the guy who originally modded my G-1 to work with an Empire relay.
I've seen that the mod has taken off over here on Mcarterbrown and you seem to have done the most versions of this mod, and also improved it the most!
As you can see in my post on pbnation I've been fixing the TM rail to my trigger frame in a very different way to how you've been doing it. I'm now in the process of redoing this but with a metal trigger frame and I was wondering if you could spread some light on:
1) what push to fit fittings your using to connect the tubing?
2) how your fixing the TM rail to the trigger frame?
I also saw that you've done it with an eNMEy, (my next project) this is where I noticed the better push to fit fitting. But this is also very similar to my G-1 because of the placement of the grip screws, did you just cut around them?
Sorry if this is the wrong place to post, any help is much appreciated.
|Thread Tools||Search this Thread|