mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Tiberius Arms (http://www.mcarterbrown.com/forums/tiberius-arms/)
-   -   t8 help!!!!! (http://www.mcarterbrown.com/forums/tiberius-arms/111606-t8-help.html)

cool0 03-09-2010 06:33 PM

t8 help!!!!!
 
I need someone who has a regular t8's help. are the front and the back screw that hold the grip on interchangeable???? or is one longer than the other????

this is important because apparently tiberius didn't bother to put a screw in the back grip of mine. now the back screw of the sa-8 isn't long enough to fit in mine either. and I know why too. on the back block of the sa-8 there is a nub that the rear grip screw screws into. on my tac 8 refurb there is no nub. thus my screw needs (in the first place to be there) and to be a 1/4inch longer. the lack of a screw there lets the gun leak.


notice that there is no nub thing...
http://i44.tinypic.com/104okfs.jpg
http://i40.tinypic.com/14vk2hg.jpg

thisissparta 03-09-2010 07:55 PM

regular T8's don't have that nub. I don't think the lack of screw would cause a leak though. Check that your powertube is screwed all the way into the valve body.

WidowMaker 03-09-2010 09:39 PM

the lack of a back screw could cause leakage as it holds the oring tight that goes from the reg to the valve...

so there was no screw in the bottom back of the grip when you got it?

WidowMaker 03-09-2010 09:39 PM

p.s. sexy nickel plate..

cool0 03-10-2010 12:01 AM

Quote:

Originally Posted by WidowMaker (Post 1207628)
the lack of a back screw could cause leakage as it holds the oring tight that goes from the reg to the valve...

so there was no screw in the bottom back of the grip when you got it?

thanks yep no scerw.

TiberiusArms 03-10-2010 10:02 AM

First I am terribly sorry to hear that your marker arrived in this condition, we pride ourselves on great customer service & attention to detail and in the rush to turn these things around we obviously missed the mark here.

Fortunately this is an easy problem to correct. The screw not being present allowed the bottom end cap oring to leak (possibly blow out all together). Just give me a ring or email at eric@tiberiusarms.com and I will get you the parts needed to make the repair out immediately.

tangus999 03-11-2010 01:32 AM

i think eric needs another vacation for all this work he been doing the last few weeks:)

Manning 03-11-2010 02:24 AM

Another example of why I chose a Tiberius Arms product as my main marker. Try getting that service from some other manufacturers or even some *ahem* Custom Shops...:old:

Props to TA and Eric!

CovertRssian 03-11-2010 08:38 AM

Quote:

Originally Posted by tangus999 (Post 1209630)
i think eric needs another vacation for all this work he been doing the last few weeks:)

Agreed, they've been pretty busy thanks to all of us :(.


All times are GMT -4. The time now is 12:12 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC