T9 Gasses down Barrel

Havoc-paintballer · 01-30-2012, 07:03 PM

So after perfectly dialing in the scope on my T9 and it performing flawlessly shooting through my house, I go to the field the next day, put a gas only mag in and attempt to dry fire. It holds air fine till I pull trigger then gases out entire 12 gram through barrel. If I eject the mag right away, it seals again until I reinsert and fire again. Then gases again. I took the whole thing apart, cleaned and check all o-rings, adjusted the regulator both up and down but can't get it to stop gasing the whole mag??!! What am I missing mates?

Echo · 01-31-2012, 11:46 AM

T9s are actually posessed with a demonic entity from the factory. They dont put them in the T8 because its too small.

My T9 likes to work fine on the test range only to give me similar grief right as I walk on the field. Nothing ive done yet, short of an exorcism, has made it behave.

Your problem though sounds like your spring isnt returning your bolt. Take the hopper adapter/ side plate off and try again, to see of the bolt is stuck all the way foward or if its just not properly catching the sear and is rideing mostly back when it vents.

Havoc-paintballer · 01-31-2012, 12:17 PM

Ahh that could be good idea since I had to replace a couple of the screws for the plate. Maybe Tib gave me some that were too long. I'll check that. Appreciate it man.

And ye its funny, the T8 always works flawlessly for me. ???!!

Echo · 01-31-2012, 02:54 PM

Quote:

Originally Posted by Havoc-paintballer

And ye its funny, the T8 always works flawlessly for me. ???!!

Mine too

01-30-2012, 07:03 PM	#1 (permalink)
Havoc-paintballer Dremel Drill Professional Join Date: Aug 2008 Location: Richmond, CA	T9 Gasses down Barrel So after perfectly dialing in the scope on my T9 and it performing flawlessly shooting through my house, I go to the field the next day, put a gas only mag in and attempt to dry fire. It holds air fine till I pull trigger then gases out entire 12 gram through barrel. If I eject the mag right away, it seals again until I reinsert and fire again. Then gases again. I took the whole thing apart, cleaned and check all o-rings, adjusted the regulator both up and down but can't get it to stop gasing the whole mag??!! What am I missing mates? __________________ My response to everything you just said: o_O nation feedback mcb feedback Gearbag Sale! Ion, Halo B, BONE, MORE!!!!

01-31-2012, 11:46 AM	#2 (permalink)
Echo Mill Monkey Join Date: Jan 2009 Location: Orange County, California	T9s are actually posessed with a demonic entity from the factory. They dont put them in the T8 because its too small. My T9 likes to work fine on the test range only to give me similar grief right as I walk on the field. Nothing ive done yet, short of an exorcism, has made it behave. Your problem though sounds like your spring isnt returning your bolt. Take the hopper adapter/ side plate off and try again, to see of the bolt is stuck all the way foward or if its just not properly catching the sear and is rideing mostly back when it vents. __________________ Anonymous Assassins Paintball TeamJust look for the pink shirts MCB Feedback SpecOps Feedback Laws of Thermodynamics; 1) You cannot win, you can only break even. 2) You cannot break even.

01-31-2012, 12:17 PM	#3 (permalink)
Havoc-paintballer Dremel Drill Professional Join Date: Aug 2008 Location: Richmond, CA	Ahh that could be good idea since I had to replace a couple of the screws for the plate. Maybe Tib gave me some that were too long. I'll check that. Appreciate it man. And ye its funny, the T8 always works flawlessly for me. ???!! __________________ My response to everything you just said: o_O nation feedback mcb feedback Gearbag Sale! Ion, Halo B, BONE, MORE!!!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search