|Tiberius Arms Everything Tiberius|
| ||Thread Tools||Search this Thread|
|09-22-2012, 06:47 PM||#1 (permalink)|
Join Date: Sep 2012
Ok so we have all heard about polishing the bolt and the piece that the bolt travels. This helps to gain efficiency, increases consistency, and help prevent drop off on the third mag (co2 only). But As I was servicing my T8.1 I noticed that there is a choke point. The powertube's dump chamber has only one small hole leading into it (the one found in the groove between the two o-rings). It seems logical to me that this choke point would cause drop off during rapid fire and also lead to inconsistency over the chrono.
Would drilling more holes into the dump chamber add to the efficiency or consistency of the marker?
Looking to test this as I just picked up a chrono.
|09-22-2012, 08:55 PM||#2 (permalink)|
That could also lead to more air being used in the time it is open. You will get better recharge.
Currently a dealer for:
Rap4(Pending) / Ninja Paintball / Avratech patch / Alumagrips / TechT
PaintballGear / Ansgear
Was sponsored by(2010):
Point Of View Cameras - For your helmet camera needs
|Thread Tools||Search this Thread|