mcarterbrown.com
 

Tiberius Arms Everything Tiberius

Reply
 
Thread Tools Search this Thread
Old 10-10-2012, 04:27 PM   #1 (permalink)
Active Member
 
Join Date: May 2012

t9.1 leak

My t9.1 is leaking out of the reg and I don't have any experience teching Tiberius guns, any suggestions on how to fix the leak?
__________________
My Feedback
shinjinian is offline   Reply With Quote
Old 10-10-2012, 04:48 PM   #2 (permalink)
Paintball Ballistician :P
 
uv_halo's Avatar
 
Join Date: Mar 2008

The 9.1 reg is designed to vent if the pressure rises above what you've set the reg to.

It does this via a small o-ring/screw located in the center of the spring piston (which is visible through the regulator/velocity adjustment nut.

Some basic diagnosis questions:
What's your air source (Co2, 12gr, HPA @850PSI, etc)?

If it's the pressure relief screw, it's not really meant for adjustment but, you can try turning it in (it's a small allen screw accessible through the regulator adjustment nut) but, doing so can disable the overpressure protection if not done properly (which is less of a concern if you're using a fixed output HPA tank).

The best way to do it, is to tighten it fully, go to the chrono, adjust your velocity to 280 (or appropriate FPS). then start backing out the relief screw until it starts leaking slightly. Once it does, give it a 1/4-1/2 turn back in.

If that doesn't fix it, it may be the oring on the spring piston.
Degas the marker
Disassemble the marker (Check the videos in the Useful Resources thread)
Disassembled the reg and inspect the piston o-ring.
__________________
FN303SD Totmacher 13 | SP 'Woodstalker' Ion | 1989 Line SI Bushmaster SI Deluxe
First Strike Round Field Listing | External Ballistics, FSRs and PBs | My Feedback
Quote:
Originally Posted by Tom Kaye -in response to FS price critics
Unfortunately all of you have played the one "speedball" game of paintball for so long you can't conceive of other ways to do this and hence any new ideas seem stupid.
uv_halo is offline   Reply With Quote
Old 10-10-2012, 06:40 PM   #3 (permalink)
Active Member
 
Join Date: May 2012

I'll try that but I'm not sure it'll fix it because it dumps the whole mag (or tank if I'm using asa) Maybe I just gotta replace some orings, I'll order some and see how that works.
__________________
My Feedback
shinjinian is offline   Reply With Quote
Old 10-10-2012, 11:20 PM   #4 (permalink)
Not Banned Kerry
 
Mr.Smith's Avatar
 
Join Date: Oct 2010
Location: Ottawa, Canada

AKA Fan
Use the Useful References that are stickied in this forum or in the link in my sig, that'll give you all the diagrams and videos you need. If you need help with it still shoot me a message and I'll try to help you with it as much as I can.

EDIT:

Wait, is it a leak or dumping? Dumping means you probably dont have it assembled properly or an oring is just straight up missing.
__________________

Black Chrome T8, CCM S5, Invert Mini I, Invert Mini II, Y-framed Minimag
Feedback.
Author of Useful Resources For Tiberius Owners.
Mr.Smith is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Tiberius Arms

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:20 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC