Paintball

[Mr.Smith]

Originally Posted by mattUK

Great stuff, cheers skull.

This was the part where I was trying to find a Youtube vid of, but failed miserably.

Cheers
matt

Check out the useful resources sticky in the future, i have tons of videos in there.

[4G010H3R0]

This manual should help.. pics are included

[biteweasel]

Right I have a few pics from my new T9, as far as I can tell it works, at least the trigger returns to its starting point.


Showing where the spring joins the long bar.


And from another angle


and from top, you can see on this picture that my spring is quite short looking compared to yours.

Hope this helps.

[Echo]

There are two separate designs as far as the return spring goes. I believe it is the latest models that have the spring attached to the arm as shown above. That said, there's nothing wrong with the previous designs. Try cleaning out your sear assembly really well and lubing it, especially the pins and any metal- metal contact surfaces.

[mattUK]

Cheers for all the helps, links and pics guys .....so just as I was about to say yippee solved it then........

Originally Posted by Echo

There are two separate designs as far as the return spring goes. I believe it is the latest models that have the spring attached to the arm as shown above. That said, there's nothing wrong with the previous designs. Try cleaning out your sear assembly really well and lubing it, especially the pins and any metal- metal contact surfaces.

So my spring is ok then just an older version? - in which case, the springs not the issue to the trigger returning then

I may try getting hold of a newer spring tho, as when putting the regulator back together admittedly kept on doing it wrong lol, however what was funny was that the trigger return worked everytime (just didn't fire), even with the barrel inserted, until I actually had the springs in the right way - then the trigger freezed up again.

Think my tanks low on pressure too, so that wasn't helping either.


Cheers all
matt

[mattUK]

Originally Posted by biteweasel

Right I have a few pics from my new T9, as far as I can tell it works, at least the trigger returns to its starting point.


and from top, you can see on this picture that my spring is quite short looking compared to yours.

Hope this helps.

Cheers for the pics biteweasal, yeah this seems to be the same as the tiberius vids, so the newer version of the spring

[Echo]

Originally Posted by mattUK

I may try getting hold of a newer spring tho, as when putting the regulator back together admittedly kept on doing it wrong lol, however what was funny was that the trigger return worked everytime (just didn't fire), even with the barrel inserted, until I actually had the springs in the right way - then the trigger freezed up again.

Think my tanks low on pressure too, so that wasn't helping either.


Cheers all
matt

Hey, if it worked the other way, I'd say leave it. A new spring couldn't hurt either, it could be that yours is a little stretched and worn. Definitely try with a full tank of air, and do consider lubing that trigger assembly generously.

[mattUK]

Originally Posted by Echo

Hey, if it worked the other way, I'd say leave it. A new spring couldn't hurt either, it could be that yours is a little stretched and worn. Definitely try with a full tank of air, and do consider lubing that trigger assembly generously.

Sadly tried it with a 12g and have definitely done something to the reg or made the spring worse.....now its double/triple firing or on the whole not firing at all (bolt is pushed forward).

So need to get hold of some new springs me thinks and rebuild the regulator afterwards...annoyingly unlike in the US can't buy individual springs in the UK, only the player kits - got all excited looking at the Rockstar site I saw mentioned on here, filled up my cart and then twigged the no postage issue

[JustinTA]

Matt- Send an email about this to our service dept (service@tiberiusarms.com) and they'll get you taken care of.

Justin

[mattUK]

Originally Posted by JustinTA

Matt- Send an email about this to our service dept (service@tiberiusarms.com) and they'll get you taken care of.

Justin

Sweet, Cheers Justin

Will send an email when back home from work.


Many Thanks
Matt