mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Tiberius Arms (http://www.mcarterbrown.com/forums/tiberius-arms/)
-   -   Help converting T8.1 to T9.1 (http://www.mcarterbrown.com/forums/tiberius-arms/218601-help-converting-t8-1-t9-1-a.html)

Nightstar 11-14-2012 10:24 PM

Help converting T8.1 to T9.1
 
So I've been considering purchasing a T9.1 body, stock adapter and solid co2 stem in order to convert my pistol to rifle mode. Total cost would be about $120 which is way less cost and hassle vs selling my pistol and purchasing a T9.1.

So, before I do this am I missing anything here? I looked over the manual and I think these are the only parts I really need. Let me know if my plan is flawed before I waste my money.

skullcandy1993 11-14-2012 11:15 PM

Where are you planning on getting the parts from?

Nightstar 11-14-2012 11:18 PM

I priced them out at rockstartactical though I'm not committed to any particular vendor.

skullcandy1993 11-14-2012 11:54 PM

Ok, well if you order the body through rockstar you have to buy the rail, the hopper plate, and all of the accompanying screws seperately. Just a warning

Nightstar 11-15-2012 12:33 AM

Ah yes, the hopper plate. That would be quite an oversight. I guess I might as well buy the tac rail while I'm at it. I do have a players service kit but your right about the screws, I'd likely end up short.

So, here's the revised list:

T9.1 body $69.95
stock adapter $39.95
Upper tac rail $14.95
screw kit $10.95
Hopper feed cover $4.49
Solid CO2 stem $3.95

Am I missing anything else?

Overlord319 11-15-2012 04:38 PM

Quote:

Originally Posted by Nightstar (Post 2534309)
Ah yes, the hopper plate. That would be quite an oversight. I guess I might as well buy the tac rail while I'm at it. I do have a players service kit but your right about the screws, I'd likely end up short.

So, here's the revised list:

T9.1 body $69.95
stock adapter $39.95
Upper tac rail $14.95
screw kit $10.95
Hopper feed cover $4.49

Am I missing anything else?

Barrel shroud? Not necessary but not sure if that's what you wanted

skullcandy1993 11-15-2012 05:43 PM

what about the actual stock? You have the adapter listed, but you would have to buy a stock to go with it. Or do you just want a pistol with a full body and a top rail?

Nightstar 11-15-2012 06:04 PM

I'd be using a tank on the rear ASA as a stock. Frankly I'd be happy to mount the tank adaptor to my existing T8.1 but it doesn't seem feasible.

skullcandy1993 11-15-2012 06:33 PM

ah. Ok, that makes sense.

You can't attach the stock adapter to the T8.1 because the T8.1 only has 2 points of connection, whereas the T9.1 has 4

Overlord319 11-15-2012 08:55 PM

Quote:

Originally Posted by skullcandy1993 (Post 2534969)
ah. Ok, that makes sense.

You can't attach the stock adapter to the T8.1 because the T8.1 only has 2 points of connection, whereas the T9.1 has 4

isn't that why he said he was getting a 9.1 body?


All times are GMT -4. The time now is 11:35 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC