|Tiberius Arms Everything Tiberius|
| ||Thread Tools||Search this Thread|
|11-28-2012, 01:43 PM||#1 (permalink)|
Idea for remote line
So I run a T8, and I love my T8 over any T8.1 I have owned, but I have been toying with the idea for running it on a remote line.
So I came up with a plan for doing that and it goes a little something like this:
1. Cut a hole through the back of the grip
2. Install some custom macro line and air fittings to replace the nipple that goes into the mag from the regulator
3. Attach that macro line to a remote nipple that is fixed to the hole you cut at the back of the grip
4. If you remove the CO2 valves from the mags there is enough room for that new air lines.
Does anyone else think that this could work?
Has anyone else ever attempted something like this?
Does anyone else have another idea for me?
|11-28-2012, 04:02 PM||#3 (permalink)|
Join Date: Sep 2012
Why not remove the relief valve and replace it with a nipple. If youregulate from the tank it works fine. I believe someone on here even had a parts list up for this.
Just seems as though molding the grip and valves would be a pain.
On Tech PB and Tiberius Arms as Soldier of Fortune
|12-02-2012, 11:43 PM||#8 (permalink)|
Dremel Drill Professional
So you would be modifying both the gun and the mags so that they couldn't go back to normal? Hmm....
The standard remote option tho for a T8 is pretty dumb if you want to play mag fed.
What about slicing the mags down the middle, leaving the CO2 half (back half) of the mag permanently attached to the inside back of the grip and the front half of the mag (ball side) could be removable? The back half could then use a standard tiberius remote line adapter. Seems like a possibility that would lead to much lighter/smaller mags and a stable remote option. Easier said than done tho lol. If I had some spare magazines that I was willing to waste I'd be willing to try this mod myself lol.
|12-03-2012, 01:09 AM||#9 (permalink)|
the way i have it thought out in my head would make the only permanent modification the hole in the grip frame for the remote nipple. If you wanted to change it back you could just put the original nipple back in the reg and reattach the CO2 valve to the mag
|12-03-2012, 04:17 AM||#10 (permalink)|
Join Date: Jul 2010
too bad there is no way to extend the length of the ball side to make room for maybe 10rd with a stick feed adaption like agent smith did on the G2 top loader in front of the tiberius mag so the ball loader pushes it up after we load it? have a typical remote line adapter in place of the co2 chamber.
|Thread Tools||Search this Thread|