mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Tiberius Arms (http://www.mcarterbrown.com/forums/tiberius-arms/)
-   -   recomended press for T9.1 regulator ? (http://www.mcarterbrown.com/forums/tiberius-arms/223082-recomended-press-t9-1-regulator.html)

ruraldawgs 01-09-2013 05:59 PM

recomended press for T9.1 regulator ?
 
Newly acquired T9.1 (with air-in-stock, xbow scope, and KJ APR2 under it) in my hands... and I will go with a Lapco FSR riffled 683 barrel for it. I have read 480, 440 output pressures are best. Anyone have experience to relate ? Which pressure would be best at the regulator ?

It will be used for FS rounds ONLY.
Im looking to shoot at about 270-280.

Overlord319 01-13-2013 04:52 PM

yeah something around 400-500 is fine. SHP isnt a good idea though

Mr.Smith 01-13-2013 06:16 PM

Quote:

Originally Posted by Overlord319 (Post 2591604)
yeah something around 400-500 is fine. SHP isnt a good idea though

Actually, it shouldnt have much of a problem running around 1000PSI, twelvies on an average day sit around 850PSI, imagine summer days with 30 degree plus weather and im sure that it nears 1000PSI

EDIT: As to the best pressure, I really have no idea.

Starless 01-14-2013 05:02 PM

Operating pressure is around 300
Probably the best is two time this number, middle pressure around 600psi

a link to a discussion on subjet
Operating pressure - Tiberius Arms Forums

Mr.Smith 01-14-2013 05:07 PM

Quote:

Originally Posted by Starless (Post 2592660)
Operating pressure is around 300
Probably the best is two time this number, middle pressure around 600psi

a link to a discussion on subjet
Operating pressure - Tiberius Arms Forums

Good link, thanks

What lead you to x2 the operating pressure?

JustinTA 01-14-2013 10:57 PM

Anything over 500 is fine. Its internally regulated so its fine if you're up at most standard reg outputs of 850

Overlord319 01-16-2013 08:28 PM

Quote:

Originally Posted by Mr.Smith (Post 2591674)
Actually, it shouldnt have much of a problem running around 1000PSI, twelvies on an average day sit around 850PSI, imagine summer days with 30 degree plus weather and im sure that it nears 1000PSI

EDIT: As to the best pressure, I really have no idea.

I was thinking more the idea of 1000psi blowing orings on the way into the gun.

Mr.Smith 01-16-2013 11:11 PM

Quote:

Originally Posted by Overlord319 (Post 2595094)
I was thinking more the idea of 1000psi blowing orings on the way into the gun.

Mags can run at 3000PSI, the orings inside them survive and they're not special

http://www.zakvetter.com/paintball_v...classic_rt.mov


All times are GMT -4. The time now is 06:21 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC