|Tiberius Arms Everything Tiberius|
| ||Thread Tools||Search this Thread|
|02-04-2013, 08:20 PM||#1 (permalink)|
T8/9 Barrel Testing Suggestions/Comparisons
So I am slowly building a collection of T8 barrels and am planning on spending a day testing them against each other to find the best barrel to use as a general use barrel as well as see if one has strengths in terms of efficiency or accuracy or what have you.
So for those who test barrels I would to hear about how you do so. What suggestions for tests you have, any suggestions would be helpful.
I already plan on doing it with the same marker for everything, that's a given. Also, the same paint. Not sure what I'm doing about air yet though. If I can get my hands on a chrony I will record the speed of every shot.
The barrels that I am planning on testing/comparing that I already have are:
Flex Honed Stock Barrel
Endgame Barrel (paid for, in the mail)
Stiffi Barrel (paid for, in the mail)
TyMcneer Brass Barrel
TyMcneer Freak'd Brass Barrel
I am also considering the following barrels:
Lapco .686 Barrel
Lapco .690 Barrel
Milsig Rifled Barrel
And if I can track them down I am going to include:
Lapco UMS Barrel
Hammerhead Rifled Barrel
SSC Freak'd Barrel
Any ideas for tests would be greatly appreciated as I would like to do all of the tests in one shot, rather than doing one at a time.
|02-04-2013, 08:40 PM||#2 (permalink)|
I'm really interested in what you come up with! I'm really interested in Tiberius markers, but don't know a lot a about the accessories and options. I look forward to your results!
** Spin Doctor's Paintball Page
** MCB Feedback
** PBN Feedback
** PBN Feedback (old)
Agglet re: Frink: "Much like a newborn baby your collection is both beautiful and disgusting."
russc: "PBN is a business, and that's why they prefer thousands of morons to hundreds of intelligent posters"
drum: "Between the ammo shipments and all the long rectangular packages, not to mention regular mail from the Pa. Superior Court, my mailman is pretty sure that I am a freak."
|02-04-2013, 08:45 PM||#3 (permalink)|
The only thing about my testing to keep in mind is that I will be using one of my T8s, so if you use a T8.1 or a T9.1 these tests won't be entirely relevant.
I am more curious if the rare barrels for the T8 are actually good upgrades or if they are just for show.
|02-04-2013, 09:52 PM||#4 (permalink)|
Just call me "Pistol Pete
Join Date: Oct 2012
First define "accuracy." One example puts it as the difference between point-of-aim (POA) and point-of-impact (POI), then that is accuracy. If you mean how tight your group sizes are, then that is "repeatability." [See http://www.the-long-family.com/group_size_analysis.htm]
Do the standard 5 groups of 5 shots, and average the most extreme c-t-c distance between two shots in each group, across the 5 groups. I did this, but instead did 6 groups of 4 shots due to the 8 shot magazine (no chrono, and in very light wind - not ideal test paramaters) this past summer - T8.1/Lapco Str8tshot 0.686/Hammerhead Bangstixx muzzle with Daisy Powerline CO2 and Valken Redemption that did not roll through the barrel (don't have a ball sizer). The average c-t-c spread was 3 inches at 50 feet (benched, of course, not handheld).
Your desire to put a little or a lot of attention to details (for example, whether or not you determine the average diameter of the paintballs used in your testing) is totally up to you. Let us know what you get in the end!!!!
Last edited by FooFighter; 02-04-2013 at 09:55 PM.
|02-05-2013, 04:52 AM||#5 (permalink)|
Sounds like a plan, good luck!
STRIDERS Youtube channel: http://www.youtube.com/channel/UC6m9S2HYH7A-YVZzoq9QkBw
STRIDERS on Facebook: http://www.facebook.com/pages/Stride...98060457001863
|02-05-2013, 12:43 PM||#6 (permalink)|
Join Date: Mar 2011
Location: Nr Leeds, North Yorkshire England(UK)
|02-05-2013, 07:20 PM||#7 (permalink)|
Not Banned Kerry
Aw damn, I think I took out the barrel guide part of the useful resources last time I edited it Talk to VooDooAddict, he knows a good amount about the barrels
|Thread Tools||Search this Thread|