mcarterbrown.com
 

Tiberius Arms Everything Tiberius

Reply
 
Thread Tools Search this Thread
Old 03-26-2013, 11:34 AM   #1 (permalink)
Newbie
 
Join Date: Mar 2013

a few questions...

Greetings new here so hope this goes well...

1st question...I have the 9.1 with the lapco/tib rifled barrel. I have played almost every weekend shooting FS only running the 13/3000 psi in stock air. Recently I have been getting breaks in the breach I believe or jams where the bolt will not reset and i have to remove the barrel to get it to fire. I just changed the detents, so my question is could it be the mag springs? Could it be the air? I am not too tech savy so much of what i've read on the net is a little above my understanding.

2nd. I also purchased the Flasc suppressor and the 5 inch 2nd gen ported extension. Will the hurt the accuracy of the round? I haven't tried it yet so just curious if it will hurt rather then help.

Thanks, kz
triathlete98 is offline   Reply With Quote
Old 03-28-2013, 01:33 AM   #2 (permalink)
Rec Poster
 
Join Date: Sep 2012

Quote:
Originally Posted by triathlete98 View Post
Greetings new here so hope this goes well...

1st question...I have the 9.1 with the lapco/tib rifled barrel. I have played almost every weekend shooting FS only running the 13/3000 psi in stock air. Recently I have been getting breaks in the breach I believe or jams where the bolt will not reset and i have to remove the barrel to get it to fire. I just changed the detents, so my question is could it be the mag springs? Could it be the air? I am not too tech savy so much of what i've read on the net is a little above my understanding.

Your bolt and reg probably need to be lubed. Go on youtube and look up T9.1 disassembly then all you need to do is follow the steps making sure to clean and lube everything properly.

2nd. I also purchased the Flasc suppressor and the 5 inch 2nd gen ported extension. Will the hurt the accuracy of the round? I haven't tried it yet so just curious if it will hurt rather then help.

No it will in no way harm your accuracy.

Thanks, kz
hope this helps
__________________
On Tech PB and Tiberius Arms as Soldier of Fortune
Overlord319 is offline   Reply With Quote
Old 03-28-2013, 09:40 AM   #3 (permalink)
Newbie
 
Join Date: Mar 2013

Ok so I did that last night lubed up everything. My one question is when my bolt slides to the rear it gets a little tight, is it supposed to be that way. I know there is a screw in the middle of the bolt am i supposed to adjust that so its smooth all the way to the rear? And what's the regulator?
triathlete98 is offline   Reply With Quote
Old 03-28-2013, 05:57 PM   #4 (permalink)
Not Banned Kerry
 
Mr.Smith's Avatar
 
Join Date: Oct 2010
Location: Ottawa, Canada

AKA Fan
Quote:
Originally Posted by triathlete98 View Post
Ok so I did that last night lubed up everything. My one question is when my bolt slides to the rear it gets a little tight, is it supposed to be that way. I know there is a screw in the middle of the bolt am i supposed to adjust that so its smooth all the way to the rear? And what's the regulator?
You shouldnt mess with that screw, Tiberius refers to it as the "firing pin". If you have been, thats probably why its not sliding smoothly. They're supposed to be factory set.
__________________

Black Chrome T8, CCM S5, Invert Mini I, Invert Mini II, Y-framed Minimag
Feedback.
Author of Useful Resources For Tiberius Owners.
Mr.Smith is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Tiberius Arms

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 02:19 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC