Originally Posted by Nightstar
Does the trigger linkage on the reg body/trigger group stick with the grip frame removed?
Does the trigger itself stick in the removed grip frame?
If no to both I'd look at the safety.
I have the same problem, except my answer is yes to both of these. I removed the pin which yook a hammer to get out. It has gunk on it. If I clean it/ get the gunk off, will that fix it?
edit: fixed it
I cleaned off as much of the gunk as I could, then put it back on. The problem was still there and I realized this time the pin was out. The housing seperated too much so the pin could just slide back in. I pushed the housing back together and now it works like it's new.