Tippmann Picture Gallery - Page 5

hmudd13 · 01-06-2007, 05:05 PM

Okay, here's a few. Nothing fancy.

Chappy · 01-27-2007, 08:33 PM

Started with a brand new procarb.
Replaced the barrel, and replaced velocity screw with short screw.
Replaced stock hammer with lightened hammer
Installed stabalizer and x-chamber. Regulated down until gun no-longer recocked, back up a hair to settle at about 600psi.
Installed RVA and used spring kit to acheive 285fps.
I run a 16oz anti-siphon and Empire Reloader.
This gun has achieved +/-0 at the chrono on two seperate occasions, and is always within+/-3 on a big red chrono

The only fault this setup has is that once the co2 cools off, there's not enuff pressure to recock without a ball chambered. As long as there's a ball there it recocks, and the reloader makes sure there is. As long as its on...

noxx55 · 02-09-2007, 11:16 PM

Here is my finally finished A5
http://www.putfile.com/pic.php?img=4729645
http://www.putfile.com/pic.php?img=4729644
http://www.putfile.com/pic.php?img=4729643
http://www.putfile.com/pic.php?img=4729642

RHINO7 · 03-08-2007, 09:41 PM

the smg-68 is sn#781

Korr · 03-09-2007, 11:43 PM

My 98. RT, rear cocking kit (the slot is filled in with JB weld), on/off drop forward (don't remember what brand it is), J&J Edge barrel (don't know if this is any good yet, only played with it once and wasn't impressed, but I was having weird pressure issues that day), Rufus Dawg centerfeed, and a reg taken from a Pirahna. The Pirahna reg is basically just a placeholder for a Palmer Stabilizer, which I hope to purchase soon. Don't know if it's any good yet.

The hopper is a modded Extreme Rage electronic hopper. My brother (an electronics whiz) took one of their "always on" hoppers and added eyes and a board he made so that it only agitates when it detects a stoppage.

Frontier_Bill · 03-21-2007, 02:22 AM

From MrBig!!

Team Rogue marker #1.

shartley · 03-27-2007, 12:09 PM

Here is the latest pictures of The Mercker (custom A5) with its new JCS Double Trigger.

UMS Dressed with rails, magwell and mag. Lapco Bigshot 8”. Ricochet hopper. Red Dot sight. Tac Light (not seen). Custom adjustable stock from UMS. Ratchet work. Polished internals. Madmann spring. RVA. JCS Double Trigger. E-Grip.

Kindred · 03-27-2007, 12:57 PM

Nothing special here.
A5 for sturdy reliability.(ditched the flatline...nothing but bad luck with it)
C3 for BBQ'ing after the game.

A5 01.jpg
C3_01.jpg

Terminator · 03-27-2007, 01:34 PM

http://www.mcarterbrown.com/gallery/...medium/A-5.JPG

ScrapIron · 03-27-2007, 01:50 PM

got one too many "http" in there.

"hey you can't load that in here!"

01-06-2007, 05:05 PM	#41 (permalink)
hmudd13 Resident Marker Monger Join Date: Jul 2006 Location: Colorado	Okay, here's a few. Nothing fancy. __________________ My wife keeps asking me why I need more markers?..........why does she do that? NO'MAAM #29 My Markers MCB Feedback AO Feedback Quoting WOLLFFY on AO; I don't recall mentioning trades, especially not for smart Farts. Thanks though. Last edited by hmudd13; 01-06-2007 at 05:13 PM..

01-27-2007, 08:33 PM	#42 (permalink)
Chappy All Hail King Skippy!! Join Date: Apr 2006 Location: Phillipsburg, NJ	Started with a brand new procarb. Replaced the barrel, and replaced velocity screw with short screw. Replaced stock hammer with lightened hammer Installed stabalizer and x-chamber. Regulated down until gun no-longer recocked, back up a hair to settle at about 600psi. Installed RVA and used spring kit to acheive 285fps. I run a 16oz anti-siphon and Empire Reloader. This gun has achieved +/-0 at the chrono on two seperate occasions, and is always within+/-3 on a big red chrono The only fault this setup has is that once the co2 cools off, there's not enuff pressure to recock without a ball chambered. As long as there's a ball there it recocks, and the reloader makes sure there is. As long as its on... __________________ My Feedback: http://www.mcarterbrown.com/forums/s...3932#post13932 "They wouldn't pay me more to bury you rich than to bury you poor." Soundgarden Last edited by Chappy; 05-20-2007 at 12:04 PM..

03-21-2007, 02:22 AM	#46 (permalink)
Frontier_Bill The Brown Guy! Join Date: Jul 2006 Location: Bozeman, Montana	From MrBig!! Team Rogue marker #1. __________________ Danger: Reading online forums may cause irreparable damage to your faith in Humanity. Team Rogue Cell #10 Feedback NO'MAAM #16

03-27-2007, 12:09 PM	#47 (permalink)
shartley COWBOY UP Join Date: Mar 2006 Location: Concord, NH	Here is the latest pictures of The Mercker (custom A5) with its new JCS Double Trigger. UMS Dressed with rails, magwell and mag. Lapco Bigshot 8”. Ricochet hopper. Red Dot sight. Tac Light (not seen). Custom adjustable stock from UMS. Ratchet work. Polished internals. Madmann spring. RVA. JCS Double Trigger. E-Grip. __________________ POG #934 / CPPA #2157 / LPPC #1 / BLACKLEAF OUTFITTERS "Post because you have something to contribute, not because you want to contribute to your post count." - Me A5OG / STRIKE FORCE MEMBER

03-27-2007, 12:57 PM	#48 (permalink)
Kindred Mod & Underwear Model Join Date: Mar 2006 Location: Neshanic Station, NJ	Nothing special here. A5 for sturdy reliability.(ditched the flatline...nothing but bad luck with it) C3 for BBQ'ing after the game. A5 01.jpg C3_01.jpg __________________ Strive for that moment when you're only a slice of pizza and a hooker away from paradise.

03-08-2007, 09:41 PM	#44 (permalink)
RHINO7 Newbie Join Date: Aug 2006	the smg-68 is sn#781

03-27-2007, 01:34 PM	#49 (permalink)
Terminator Active Member Join Date: Jul 2006	http://www.mcarterbrown.com/gallery/...medium/A-5.JPG __________________ Phase plasma rifle in a 40 megawatt range! Last edited by Terminator; 03-27-2007 at 01:57 PM..

03-27-2007, 01:50 PM	#50 (permalink)
ScrapIron Cobra Paintball Fanatic Join Date: Apr 2006 Location: Central Iowa	got one too many "http" in there. "hey you can't load that in here!" __________________ Shoot first, check armband tape later. Proud to play Lucky 7 and Fledgling scenario games. member #190 of LPPC, Cobra Paintball Fanatic & Purple Foot Indian Tribe My Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search