68 special orings sizes

ficone · 01-10-2012, 01:22 AM

Can someone please tell me what specific size orings the tippmann 68 special uses. Its the first marker i ever used back in the day when i started playing paintball and i want to get it back up and running again and need to rebuild an replace all(they are falling apart)orings. I love this marker and have owned it since 1990 and i would love to dust it off an play with it this season. Any help you guys can give me would be greatly appreciated.

ficone · 01-11-2012, 09:01 AM

Any old school cats have an ans for me?

randall ace · 01-11-2012, 09:16 AM

nevermind - read that wrong ... im an idiot .....LOL

Rolling Thunder 67 · 01-11-2012, 03:28 PM

Tippmann 68 Special O-RING SIZES

Hammer and outer valve- 7/8 x 1 x 1/16
Power Tube- 3/4 x 15/16 x 3/32
Front Bolt- 9/16 x 11/16 x 1/16
Inner Valve Seats- 3/8 x 1/2 x 1/16
Linkage Rod- 5/16 x 7/16 x 1/16
ASA Pin- 3/16 x 5/16 x 1/16
*NOTE* these are behind the ASA pin and not visible unless you remove the fitting. If not leaking I would suggest them to be left alone,however if there is a problem be prepared to replace anywhere from 1-3.

Hope this Helps.

*REMINDER* This Marker needs liquid CO2 to function properly,hope you have your syphon tank ready,I'd hate to see it all seal up and not performing the way you remember it,If you need any assistance PM me.

ficone · 01-13-2012, 09:19 AM

Thank you very much! I have everything needed. Now i must order orings.

Prophet · 01-29-2012, 11:11 PM

Sorry to revive a zombie thread, but ficone; where are you ordering your o-rings for this thing? I just sold one on eBay that I thought functioned and my buyer is complaining that it's not working. He wants me to look for an o-ring kit for him, but I can't find one anywhere.

If you let me know where you're getting the orings I'd be grateful!

B-17 · 02-11-2012, 04:41 PM

Short 304 should be able to take care of you, he has an o-ring thread.

If you're still in need of them that is.

justkomar · 02-17-2012, 03:39 PM

pbsports. com sells slot of parts, got my oring kit in today.

B-17 · 02-24-2012, 01:28 AM

Short 304 is cooler.

THAT IS ALL.

01-10-2012, 01:22 AM	#1 (permalink)
ficone Rec Poster Join Date: Nov 2006	68 special orings sizes Can someone please tell me what specific size orings the tippmann 68 special uses. Its the first marker i ever used back in the day when i started playing paintball and i want to get it back up and running again and need to rebuild an replace all(they are falling apart)orings. I love this marker and have owned it since 1990 and i would love to dust it off an play with it this season. Any help you guys can give me would be greatly appreciated.

01-11-2012, 09:16 AM	#3 (permalink)
randall ace still recovering ..... Join Date: Dec 2009 Location: columbus, ohio	nevermind - read that wrong ... im an idiot .....LOL __________________ BEEN SLINGIN' PAINT OFF AND ON SINCE 1989 ** i maintain 3rd shift hours so if i dont respond right away during the day - ya know why my feedback : http://www.mcarterbrown.com/forums/f...-feedback.html http://www.pbnation.com/feedback.php?u=488994 Last edited by randall ace; 01-11-2012 at 09:21 AM.

01-11-2012, 03:28 PM	#4 (permalink)
Rolling Thunder 67 Old School Fool Join Date: Jul 2009 Location: Cobourg,Ontario,Canada	Tippmann 68 Special O-RING SIZES Hammer and outer valve- 7/8 x 1 x 1/16 Power Tube- 3/4 x 15/16 x 3/32 Front Bolt- 9/16 x 11/16 x 1/16 Inner Valve Seats- 3/8 x 1/2 x 1/16 Linkage Rod- 5/16 x 7/16 x 1/16 ASA Pin- 3/16 x 5/16 x 1/16 NOTE these are behind the ASA pin and not visible unless you remove the fitting. If not leaking I would suggest them to be left alone,however if there is a problem be prepared to replace anywhere from 1-3. Hope this Helps. REMINDER This Marker needs liquid CO2 to function properly,hope you have your syphon tank ready,I'd hate to see it all seal up and not performing the way you remember it,If you need any assistance PM me. __________________ http://www.mcarterbrown.com/forums/f...-feedback.html Last edited by Rolling Thunder 67; 01-11-2012 at 03:39 PM. Reason: Forgot Info

01-29-2012, 11:11 PM	#6 (permalink)
Prophet Newbie Join Date: Oct 2007	Sorry to revive a zombie thread, but ficone; where are you ordering your o-rings for this thing? I just sold one on eBay that I thought functioned and my buyer is complaining that it's not working. He wants me to look for an o-ring kit for him, but I can't find one anywhere. If you let me know where you're getting the orings I'd be grateful! __________________ Isaiah 29:16 "You turn things upside-down, as if the potter were thought to be like the clay! Shall what is formed say to him who formed it, 'He did not make me'? Can the pot say of the potter, 'He knows nothing'? Last edited by Prophet; 01-29-2012 at 11:31 PM. Reason: figured you didn't need my life story. xD

02-17-2012, 03:39 PM	#8 (permalink)
justkomar Newbie Join Date: Jan 2012	pbsports. com sells slot of parts, got my oring kit in today. __________________ Up'd Mag FS/FT

01-11-2012, 09:01 AM	#2 (permalink)
ficone Rec Poster Join Date: Nov 2006	Any old school cats have an ans for me?

01-13-2012, 09:19 AM	#5 (permalink)
ficone Rec Poster Join Date: Nov 2006	Thank you very much! I have everything needed. Now i must order orings.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search