| ||Thread Tools||Search this Thread|
|08-24-2012, 11:46 PM||#1 (permalink)|
Join Date: Feb 2012
Location: East Brunswick, New Jersy
Tippmann smg 60 help!
I recently aired up my SMG 60 and tried firing it with a loaded and clip and the marker only fired one ball and the clip stopped feeding outward!
If there is someone who knows whats wrong please help!
|08-26-2012, 11:24 AM||#4 (permalink)|
is the SMG pawl facing the right direction?
Pics help, videos are eve better.
I never needed a siphon tank with my smgs but they would "choke" out sometimes when the tank was about half empty.
|09-01-2012, 12:17 AM||#5 (permalink)|
Join Date: Jan 2009
Location: Orange County, California
Also, make sure your paint isnt too loose in the clips. The issue here is that sometimes a paintball will jump out of the clip and manage to get a little ways down the barrel before the gun is fired. If its far enough along, there wont be enough back pressure to trip the pawl and index the next round.
Barring that, make sure that pawl is nice and squeaky clean, and will return to its rest position under its own spring force. Check that by just pushing on it, if it snaps back, its good. If its kind of gummy or wont return by itself, you need to clean it out or replace the pawl spring.
|Thread Tools||Search this Thread|