tippmann smg 60 help! part 2

ulsterduke · 09-21-2012, 11:58 PM

So I got the clips to feed properly but now I got another problem! Every time I fire it goes full auto then the bolt goes foward and doesn't come back, thoughts?

Jebs04 · 09-22-2012, 10:39 AM

Maybe check the O ring on the rear bolt.

ulsterduke · 09-22-2012, 12:50 PM

I put in a new oring, and its still doing that! could it b the co2 tank?

Jebs04 · 09-22-2012, 12:53 PM

Are you using a Siphon C02?

ulsterduke · 09-22-2012, 06:16 PM

Yea

c6quad · 09-22-2012, 09:52 PM

check the body tube for deep scratches inside it. maybe you're getting blow-by past the bolt o-ring. also, is the pin that the main spring rides on straight?

ulsterduke · 09-23-2012, 09:42 PM

Its a little curved

ulsterduke · 09-25-2012, 01:25 PM

I found the problem! The orings I am using keep breaking apart, anyone know of good durable orings
That could fit the smg 60?

c6quad · 09-25-2012, 02:56 PM

contact Jay. i don't have his contact info but he's a seller on ebay and his name on there is pballjay or something close to that. he runs a store in Indiana i'm pretty sure. he has a lot of parts for the smg-60.

ulsterduke · 09-26-2012, 11:31 PM

Nvm, now the rear spring is too worn and it doesnt bounce the bolt back! anyone know where i can find a good spring for it?

09-21-2012, 11:58 PM	#1 (permalink)
ulsterduke Rec Poster Join Date: Feb 2012 Location: East Brunswick, New Jersy	tippmann smg 60 help! part 2 So I got the clips to feed properly but now I got another problem! Every time I fire it goes full auto then the bolt goes foward and doesn't come back, thoughts?

09-22-2012, 10:39 AM	#2 (permalink)
Jebs04 Newbie Collector Join Date: Feb 2011 Location: Walton, KY	Maybe check the O ring on the rear bolt. __________________ Markers Owned Currently: 160ish FEEDBACK

09-22-2012, 12:53 PM	#4 (permalink)
Jebs04 Newbie Collector Join Date: Feb 2011 Location: Walton, KY	Are you using a Siphon C02? __________________ Markers Owned Currently: 160ish FEEDBACK

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-22-2012, 12:50 PM	#3 (permalink)
ulsterduke Rec Poster Join Date: Feb 2012 Location: East Brunswick, New Jersy	I put in a new oring, and its still doing that! could it b the co2 tank?

09-22-2012, 06:16 PM	#5 (permalink)
ulsterduke Rec Poster Join Date: Feb 2012 Location: East Brunswick, New Jersy	Yea

09-23-2012, 09:42 PM	#7 (permalink)
ulsterduke Rec Poster Join Date: Feb 2012 Location: East Brunswick, New Jersy	Its a little curved

09-25-2012, 01:25 PM	#8 (permalink)
ulsterduke Rec Poster Join Date: Feb 2012 Location: East Brunswick, New Jersy	I found the problem! The orings I am using keep breaking apart, anyone know of good durable orings That could fit the smg 60?

09-26-2012, 11:31 PM	#10 (permalink)
ulsterduke Rec Poster Join Date: Feb 2012 Location: East Brunswick, New Jersy	Nvm, now the rear spring is too worn and it doesnt bounce the bolt back! anyone know where i can find a good spring for it?