98 project

SMIT · 10-09-2012, 01:06 PM

Wat up guys. im new to the sight figured i'd show off my new project. Used a glock carbine kit i saw on a post trying to use it for the t8/t8.1. i didnt have one of those so i used my 98. fits really well after a lot of cutting and grinding. its not finished however. I still need a sight and an e-trigger. Also, looking for a t9 longbow kit as the feed source. just wanted to see wat u guys thought and if u had any ideas to contribute. thanks

sorry bout the pics bein a lil fuzzy i couldn't find a good setting.

before the cutting and grinding

after

Mounted the longbow kit and ran the air line through the grip (temporarily)

subyrally · 10-09-2012, 03:37 PM

nifty, i like how that came out so far. i wouldnt mind somehing like that myself.

Murf425 · 10-09-2012, 03:45 PM

Man...that is really clean and slick. I like it.

SMIT · 10-17-2012, 06:32 PM

thanks friend

DarkShadowHunter · 10-18-2012, 12:59 PM

Not bad. The only thing I am not liking is the macro line that is just dangling there. I don't like to see the the connection point between the source and the marker just hanging.

Murf425 · 10-18-2012, 01:32 PM

True. I probably would have left the air routed like it was originally, and ran the remote to the bottomline.

DarkShadowHunter · 10-19-2012, 01:12 AM

I would have found a way to run it through the stock myself. That results in cleaner lines, unless you end up sticking a t-fitting with a gauge sticking out one side and a 90 degree macro elbow out the other side.

SMIT · 10-19-2012, 10:15 AM

Quote:

Originally Posted by DarkShadowHunter

Not bad. The only thing I am not liking is the macro line that is just dangling there. I don't like to see the the connection point between the source and the marker just hanging. I would have found a way to run it through the stock myself. That results in cleaner lines, unless you end up sticking a t-fitting with a gauge sticking out one side and a 90 degree macro elbow out the other side.

ya i was trying to figure out how i was going to attach it to the frame. It wasn't going to stay like that. The stock was my next idea, which i am still trying to figure out. might have to get longer line i suppose.for now i temporarily rerouted the line through the grip to kind of clean it up a bit

DarkShadowHunter · 10-21-2012, 08:10 PM

After looking at the pictures of the stock more closely I would use at least two street 90* elbows and a 45* elbow. You might need a male to female extender, but I am not sure since I don't have the parts in front of me. The easiest thing to do would be to drill a hole on the bottom and on the right side of the stock for the fittings. Then have the air line run down the side of the marker to the valve.

Another option would be to route the line through the shell and then have it come out above the where the it would go into the valve. Heck if there is enough material on the shroud I would mill out a slot for some macro line to run down the inside of it to the valve. If there is only enough room to do half the diameter of the line there should be enough metal on the 98 to mill out for the other half of the line.

10-09-2012, 01:06 PM	#1 (permalink)
SMIT Rec Poster Join Date: Oct 2012	98 project Wat up guys. im new to the sight figured i'd show off my new project. Used a glock carbine kit i saw on a post trying to use it for the t8/t8.1. i didnt have one of those so i used my 98. fits really well after a lot of cutting and grinding. its not finished however. I still need a sight and an e-trigger. Also, looking for a t9 longbow kit as the feed source. just wanted to see wat u guys thought and if u had any ideas to contribute. thanks sorry bout the pics bein a lil fuzzy i couldn't find a good setting. before the cutting and grinding after Mounted the longbow kit and ran the air line through the grip (temporarily) Last edited by SMIT; 10-23-2012 at 01:40 PM.

10-09-2012, 03:45 PM	#3 (permalink)
Murf425 Pop-Up Ninja Join Date: Oct 2007 Location: Brandon, FL	Man...that is really clean and slick. I like it. __________________ My Feedback Thread Go ye therefore to all the nations, shooting them in the face with balls of paint. Proud member of Team On Target. www.teamontargetpb.com

10-18-2012, 12:59 PM	#5 (permalink)
DarkShadowHunter Scewball, One Each Join Date: Jan 2008 Location: Michigan	Not bad. The only thing I am not liking is the macro line that is just dangling there. I don't like to see the the connection point between the source and the marker just hanging. __________________ Screwball, One Each Hole In The Wall Paintball St8 Balla #268 How To: Palmerized Carbine Stock for the 98 Series Crossfire My Feedback

10-18-2012, 01:32 PM	#6 (permalink)
Murf425 Pop-Up Ninja Join Date: Oct 2007 Location: Brandon, FL	True. I probably would have left the air routed like it was originally, and ran the remote to the bottomline. __________________ My Feedback Thread Go ye therefore to all the nations, shooting them in the face with balls of paint. Proud member of Team On Target. www.teamontargetpb.com

10-19-2012, 01:12 AM	#7 (permalink)
DarkShadowHunter Scewball, One Each Join Date: Jan 2008 Location: Michigan	I would have found a way to run it through the stock myself. That results in cleaner lines, unless you end up sticking a t-fitting with a gauge sticking out one side and a 90 degree macro elbow out the other side. __________________ Screwball, One Each Hole In The Wall Paintball St8 Balla #268 How To: Palmerized Carbine Stock for the 98 Series Crossfire My Feedback

10-09-2012, 03:37 PM	#2 (permalink)
subyrally C'mon Man! Join Date: Oct 2008 Location: Frederick, Md	nifty, i like how that came out so far. i wouldnt mind somehing like that myself.

10-17-2012, 06:32 PM	#4 (permalink)
SMIT Rec Poster Join Date: Oct 2012	thanks friend

10-21-2012, 08:10 PM	#9 (permalink)
DarkShadowHunter Scewball, One Each Join Date: Jan 2008 Location: Michigan	After looking at the pictures of the stock more closely I would use at least two street 90* elbows and a 45* elbow. You might need a male to female extender, but I am not sure since I don't have the parts in front of me. The easiest thing to do would be to drill a hole on the bottom and on the right side of the stock for the fittings. Then have the air line run down the side of the marker to the valve. Another option would be to route the line through the shell and then have it come out above the where the it would go into the valve. Heck if there is enough material on the shroud I would mill out a slot for some macro line to run down the inside of it to the valve. If there is only enough room to do half the diameter of the line there should be enough metal on the 98 to mill out for the other half of the line. __________________ Screwball, One Each Hole In The Wall Paintball St8 Balla #268 How To: Palmerized Carbine Stock for the 98 Series Crossfire My Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search