mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Tippmann (http://www.mcarterbrown.com/forums/tippmann/)
-   -   Ideas on Bottomline stock for TPX? (http://www.mcarterbrown.com/forums/tippmann/219483-ideas-bottomline-stock-tpx.html)

pump 11-24-2012 10:44 PM

Ideas on Bottomline stock for TPX?
 
anyone know how i could possibly put a bottonline or a Tstock on my TPX?
it must be bottomline

BaconBaller 11-25-2012 11:50 PM

Quote:

Originally Posted by pump (Post 2543302)
anyone know how i could possibly put a bottonline or a Tstock on my TPX?
it must be bottomline

I hate to seem like a buzzkill... but isnʻt there a mag there? I imagine you could run a bunch of different little air setups off the front rail, but for the most part I think bottomline TPXs would require some body work to the tpx itself. Just my thoughts on the matter.

pump 11-26-2012 06:46 PM

so bottomline and a bit back

nofxkid2005 11-26-2012 10:04 PM

I suppose you could construct a custom stock that wraps around the grip but leaves the mag well clear. Something like the old Crosman stocks on a Sheridan...

4G010H3R0 11-26-2012 11:03 PM

Quote:

Originally Posted by pump (Post 2543302)
anyone know how i could possibly put a bottonline or a Tstock on my TPX?
it must be bottomline

what about this?
http://i160.photobucket.com/albums/t...O/IMG_9494.jpg

thats the only thing I could come up with..

pump 11-27-2012 06:28 AM

Howd they do that?

4G010H3R0 11-27-2012 10:13 AM

Quote:

Originally Posted by pump (Post 2545332)
Howd they do that?

I would say its two pieces of aluminum shaped to fit around the grip with two screws in the base. One in the TPX screw spot the other in the Lanyard loop.
Then just trial an error did they go it right.
Honestly doesnt look too hard if you have the know how/tools.

BaconBaller 11-27-2012 06:54 PM

Quote:

Originally Posted by 4G010H3R0 (Post 2545451)
I would say its two pieces of aluminum shaped to fit around the grip with two screws in the base. One in the TPX screw spot the other in the Lanyard loop.
Then just trial an error did they go it right.
Honestly doesnt look too hard if you have the know how/tools.

Yeah, this should work for you. Good luck, and post pics when done :p

pump 11-27-2012 07:55 PM

i wonder if those 2 holes can hold enough, i wonder if a clam shell would work better, unless that stock is clam shelled

pump 11-27-2012 08:07 PM

4go10hero, that your pic? if not, whose?


All times are GMT -4. The time now is 04:24 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC