trracer hopper

captaincamaro · 12-02-2012, 09:17 AM

can i fit a standard gravity-fed hopper from a 98 onto the empire trracer? i am meeting a buddy at the field who has no hopper for his new gun. wanna help him out if i can. will i need any extra attatchments? thanks for your time.

Jebs04 · 12-02-2012, 10:12 AM

You can take sandpaper and work it down to a smaller size. However then you may need electrical tape to make it fit your 98 again...lol

mcgral18 · 12-02-2012, 10:42 AM

I can put a hopper on the Empire Trracer, though it is a little tight. If he has the hopper adaptor, you shouldn't need anything else.

The Inflicted · 12-03-2012, 03:19 PM

The Trracer's clamping feedneck is adjustable, so you should be able to mount anything you want without too much trouble, hopefully without sanding or taping at all.

12-02-2012, 09:17 AM	#1 (permalink)
captaincamaro low & slow Join Date: Nov 2012 Location: florida	trracer hopper can i fit a standard gravity-fed hopper from a 98 onto the empire trracer? i am meeting a buddy at the field who has no hopper for his new gun. wanna help him out if i can. will i need any extra attatchments? thanks for your time.

12-02-2012, 10:12 AM	#2 (permalink)
Jebs04 Newbie Collector Join Date: Feb 2011 Location: Walton, KY	You can take sandpaper and work it down to a smaller size. However then you may need electrical tape to make it fit your 98 again...lol __________________ Markers Owned Currently: 160ish FEEDBACK

12-02-2012, 10:42 AM	#3 (permalink)
mcgral18 Seasoned Member Join Date: Nov 2010 Location: Sudbury, ON	I can put a hopper on the Empire Trracer, though it is a little tight. If he has the hopper adaptor, you shouldn't need anything else. __________________ Feedback http://www.mcarterbrown.com/forums/f...-feedback.html An AK will not be stopped by a ham sandwich.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-03-2012, 03:19 PM	#4 (permalink)
The Inflicted . Join Date: Sep 2008 Location: Chattanooga, TN	The Trracer's clamping feedneck is adjustable, so you should be able to mount anything you want without too much trouble, hopefully without sanding or taping at all.