mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Tippmann (http://www.mcarterbrown.com/forums/tippmann/)
-   -   Tippmann Pro Shop ASA/LPR Review? (http://www.mcarterbrown.com/forums/tippmann/220318-tippmann-pro-shop-asa-lpr-review.html)

WholemealDrop 12-05-2012 12:55 AM

Tippmann Pro Shop ASA/LPR Review?
 
does anyone have any thoughts on the proshop asa/lpr combo? I'm looking into gathering parts for a ebolt setup and can't get a concrete answer on what people think of the proshop over say a normal asa with a LPR attached to it. any thoughts would be great.

P.S. if you have any parts or guidance for an ebolt setup that would be great.

WholemealDrop 12-07-2012 02:32 AM

Bump

Jebs04 12-08-2012 12:03 AM

The Pro Shop one has an issue if the set screw that holds it on the rail that attaches to the bottom of the grip. If you do tighten it to much and it is on the seam for the front part of the ASA were it comes apart it will break the seal and leak, then you will have to replace the housing. As long as you are paying attention to were you are tightening the set screw it is not an issue... However I have not had any issues with all of my 5 pro shop ASA Regulators.. However there is nothing wrong with the ASA and external regulator, some older e bolt kits came that way. Then you can use a Palmers rock reg!...lol

WholemealDrop 12-08-2012 02:10 AM

see now whats the difference to a palmers stabilizer male, female, and micro rock?

fullofpaint 12-08-2012 09:41 AM

Stabilizers are High Pressure regs, Rock's, micro or regular are low pressure regulators. The male stab is a typical reg, screws in like any other. Female stab, is like an Asa, you screw a tank or something into it.


All times are GMT -4. The time now is 10:57 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC