mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 03-29-2013, 10:34 PM   #1 (permalink)
MilSim
 
WholemealDrop's Avatar
 
Join Date: Apr 2012
Location: Minnesnowta

Custom E-bolt Project

So I'm in the process of compiling ideas for a fully custom Tippmann 98 e-bolt. I'm looking at making a custom 2 way ram but the issue I'm running into now is the electronics. I need to find a relatively small board to fit in the grip frame area along with a board and 9V battery. Anyone know of a cheap board that can run a 2 way ram? A one way e-bolt ram runs with a 3 way solenoid so I think I would need a 4 way solenoid correct?
WholemealDrop is offline   Reply With Quote
Old 03-29-2013, 10:43 PM   #2 (permalink)
MCB Member
 
Cowboy's Avatar
 
Join Date: Aug 2006
Location: Waco, Texas

CCM Fan
AKA Fan
Brass N Wood Fan
Kilt Fan
Palmers Fan
RTP Fan
i modified an ion board by unsoldering the noid and wiring in an intimidator noid then i used an ion eye board unsoldered the eyes and wired in timmy eyes and i was using a 2 way ram (it was a single action but i took the spring out and tapped another hole) with dual qevs, in all i had a 22+ bps monster that for the most part looked like a stock 98 lol

as for boards these will work

timmy
ion
shocker (not shoebox)
viking
dm(any year)
t-board
quest
angel
and a few others
__________________
Quote:
Crash: Your not talking about that freak of nature you built are you?
"Speak softly and carry a big stick, if that don't work, start yellin' and grab a shotgun"-Bill engvall.

"I believe that the sound of racking the pump of a shotgun is universally recognized as "kiss your a$$ goodbye""

WTB works minicocker

FEEDBACK http://www.mcarterbrown.com/forums/f...-feedback.html


come fight me!! @ http://trigger1987.mybrute.com

Last edited by Cowboy; 03-29-2013 at 10:46 PM.
Cowboy is offline   Reply With Quote
Old 03-29-2013, 10:52 PM   #3 (permalink)
MilSim
 
WholemealDrop's Avatar
 
Join Date: Apr 2012
Location: Minnesnowta

Not bad but I'm not that great at soldering. I know this isn't going to be a drop in kit but I'd prefer to modify the body than the electronics.
WholemealDrop is offline   Reply With Quote
Old 05-01-2013, 06:14 PM   #4 (permalink)
Cocker Whore
 
Join Date: May 2013
Location: Northern Indiana

If you would rather modify the body try doing an eblade conversion on the handle. Worrblade/karnivor/eblade framed Tippmann 98 custom EBOLT

I hope this helps. I am trying to build an A5 ebolt right now.
Buwaro is offline   Reply With Quote
Old 05-01-2013, 08:26 PM   #5 (permalink)
MilSim
 
WholemealDrop's Avatar
 
Join Date: Apr 2012
Location: Minnesnowta

Would love to see your project. Shouldn't be too hard. I already have everything I need so buying a new frame and accessories would be too much money. Got a Viking WAS board with all the hook ups for it so I just need to make everything fit and extend the wires
WholemealDrop is offline   Reply With Quote
Old 05-08-2013, 09:33 AM   #6 (permalink)
Cocker Whore
 
Join Date: May 2013
Location: Northern Indiana

I am actually having trouble finding a cylinder for my project. I have a board, solenoid and microswitch, but nothing for them to operate.
Buwaro is offline   Reply With Quote
Old 05-08-2013, 12:50 PM   #7 (permalink)
MilSim
 
WholemealDrop's Avatar
 
Join Date: Apr 2012
Location: Minnesnowta

They are hard to come by. I have a BSI ebolt setup. Just missing the battery harness.
WholemealDrop is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Tippmann

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 01:31 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC