UMS'd ICP B5 Bullpup

Flatline's Up! · 10-23-2007, 03:11 PM

Big thanks to JSB for loaning me his ICP Bullpup for Dday and letting me mod it out.

Although it's a lot later than I wanted to get it all done, here are the results...

Highpoints:
Top rail w/red/green dot, side rails, bottom Z rail, tac light, hogue grip, tac cap, stiffi carbon fiber barrel, ported barrel shroud, Hk 91 .308 mag w/Palmers Stab inside and remote nipple on right.

Thanks again JSB!!!!

pizzaluvr · 10-23-2007, 03:15 PM

That's awesome, great work.

I like the mag alot.

BigOldSkool · 10-23-2007, 03:18 PM

I still badly want to get my hands on one of the B5 kits but I hate remotes and that is the one hurdle that is stopping me in my track. There just isnt a comfortable place to put a tank on one.

Good work FLUP!

sparky · 10-23-2007, 03:18 PM

That's one of the nicest B5's I've seen yet! Love some of the work that UMS does...

(Woot 500 posts!)

commando kyle · 10-23-2007, 04:07 PM

Question... is there any way to mount a vertical 4oz tank on one of those bad boys?

JeramieJ · 10-23-2007, 04:20 PM

very, very nice.

Be nice to see the right side of the gun.

There appears to be plenty of meat and area in the stock to get creative for a 3.5oz to rest in there.....or a shinny bottle.

-Jeramie

Flatline's Up! · 10-23-2007, 05:06 PM

the stock holds the APE Rampage board and the battery, so no go there.
IMHO the easiest way would be either to mount it on the off hand side of the body, or to run a hard line (or macro) up to the front grip and put a simple duck bill facing forward there.

IMHO a 9oz w/a shroud would look a lot like a stubby granade launcher and with the right barrel length/barrel shroud combo (like shown above) would pull off the look nicely and still be a plenty tight package to haul around.

Thanks for the kind comments folks,
B

pizzaluvr · 10-23-2007, 05:14 PM

What's that stuff on the front of the barrel? Is it on all St!ffies?

RealtorTommy · 10-23-2007, 05:19 PM

If it's not posted at ICP..it should be...Jeff and Peter are working hard to make the B-5 bulletproof.......By far the best on I have seen yet...

HurtCow · 10-23-2007, 05:25 PM

Amazing. Great work. What's it weigh?

10-23-2007, 03:11 PM	#1 (permalink)
Flatline's Up! Active Member Join Date: Apr 2006 Posts: 476	UMS'd ICP B5 Bullpup Big thanks to JSB for loaning me his ICP Bullpup for Dday and letting me mod it out. Although it's a lot later than I wanted to get it all done, here are the results... Highpoints: Top rail w/red/green dot, side rails, bottom Z rail, tac light, hogue grip, tac cap, stiffi carbon fiber barrel, ported barrel shroud, Hk 91 .308 mag w/Palmers Stab inside and remote nipple on right. Thanks again JSB!!!! __________________ Support Project M.

10-23-2007, 03:15 PM	#2 (permalink)
pizzaluvr Nazi-Treasure Hunter Join Date: Jun 2007 Location: Arkansas Posts: 2,841	That's awesome, great work. I like the mag alot. __________________ MCB Feedback +26/-0 PBN Feedback +2/-0 Rapper LE 14/25 OC/SC Feed-Side Car-CP barrel-Sniper-Mini-Midget-Halfblock I ball for Team Fracture

10-23-2007, 03:18 PM	#3 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY Posts: 1,733	I still badly want to get my hands on one of the B5 kits but I hate remotes and that is the one hurdle that is stopping me in my track. There just isnt a comfortable place to put a tank on one. Good work FLUP! __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

10-23-2007, 04:07 PM	#5 (permalink)
commando kyle Reap the whirlwind... Join Date: Apr 2006 Posts: 292	Question... is there any way to mount a vertical 4oz tank on one of those bad boys? __________________ Captain of the Camo Bandits Scenario Paintball Team. "Who Dares, Wins."

10-23-2007, 04:20 PM	#6 (permalink)
JeramieJ MCB Member Join Date: Dec 2006 Posts: 766	HOT ! very, very nice. Be nice to see the right side of the gun. There appears to be plenty of meat and area in the stock to get creative for a 3.5oz to rest in there.....or a shinny bottle. -Jeramie __________________ Going back to ol' skool brass Current Stock Past Paintball Guns Feedback

10-23-2007, 05:06 PM	#7 (permalink)
Flatline's Up! Active Member Join Date: Apr 2006 Posts: 476	the stock holds the APE Rampage board and the battery, so no go there. IMHO the easiest way would be either to mount it on the off hand side of the body, or to run a hard line (or macro) up to the front grip and put a simple duck bill facing forward there. IMHO a 9oz w/a shroud would look a lot like a stubby granade launcher and with the right barrel length/barrel shroud combo (like shown above) would pull off the look nicely and still be a plenty tight package to haul around. Thanks for the kind comments folks, B __________________ Support Project M.

10-23-2007, 05:14 PM	#8 (permalink)
pizzaluvr Nazi-Treasure Hunter Join Date: Jun 2007 Location: Arkansas Posts: 2,841	What's that stuff on the front of the barrel? Is it on all St!ffies? __________________ MCB Feedback +26/-0 PBN Feedback +2/-0 Rapper LE 14/25 OC/SC Feed-Side Car-CP barrel-Sniper-Mini-Midget-Halfblock I ball for Team Fracture

10-23-2007, 05:19 PM	#9 (permalink)
RealtorTommy Team On Target Join Date: Sep 2007 Location: Central Florida Posts: 2,568	If it's not posted at ICP..it should be...Jeff and Peter are working hard to make the B-5 bulletproof.......By far the best on I have seen yet... __________________ Team On Target sponsored by http://www.techtpaintball.com/ http://www.flurryindustries.com/ http://www.orbitalpaintball.com/ http://www.planeteclipse.com/ Ebay Feedback313+postive:http://feedback.ebay.com/ws/eBayISAP...me=STRK:ME:UFS MCB Feedback:12+postive:http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search