| ||Thread Tools||Search this Thread|
|01-21-2014, 09:42 AM||#3 (permalink)|
Join Date: Mar 2011
hmm...seems like a lot. i'm not familiar with the tpx, but if the regulator is serviceable it might be time to clean and re-lube that. and as usual, less-than-ideal paint will have wide velocity swings. that may or may not apply to you.
|02-05-2014, 12:43 PM||#6 (permalink)|
Join Date: Jan 2010
They shouldn't sell a pistol if it can't maintain a decent average on the platform it's supposed go just, which is a co2 cartridge.
If I wanted to use HPA, I'd get something else.
Which I am going to do now.
The milsig M17 CQC
I'm thoroughly disappointed in the Tipx.
And I understand getting drop-off when the cartridge gets low.
But going from 250 to well over 300 is downright dangerous, and unacceptable.
Automags retired. Enmeys are the successor.
|02-09-2014, 07:43 AM||#8 (permalink)|
It's All In The Reflexes.
There was a thread like this in the Sidearms section. I forget the answer to the problem though. PM AgentSmith he'd know the answer.
|02-09-2014, 10:34 AM||#9 (permalink)|
Join Date: Apr 2006
Location: Atlanta, GA
I saw something in the manual about a Regulator Pressure Relief Valve. If it is too tight, the gun will over-pressurize, probably giving some messed velocity swings.
I'm curious because a kinda want one
Last edited by ironnerd88; 02-09-2014 at 10:37 AM.
|02-09-2014, 11:50 AM||#10 (permalink)|
Join Date: Jun 2011
|Thread Tools||Search this Thread|