|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
01-06-2008, 12:39 PM
| #1 (permalink) | |
| Active Member  Join Date: Jan 2008 Location: So-Cal
Posts: 200
| A-5, X7 C/A adapter Hey all I'm new to the forum. I just picked up an X7 and I want to fit a constant air adapter where the magazine (feed line) is. Vertical Co2 tank. I hope that makes sense. Does anyone make the adapter I am looking for?
__________________ Quote:
Feedback:http://www.mcarterbrown.com/forums/f...-feedback.html | |
|  |
|
01-08-2008, 09:29 PM
| #4 (permalink) | |
| Active Member Join Date: Jan 2008 Location: So-Cal
Posts: 200
| Yeah, exactly. In retrospect I should have just bought another A5. 
__________________ Quote:
Feedback:http://www.mcarterbrown.com/forums/f...-feedback.html | |
|
| |
|
01-09-2008, 10:13 PM
| #5 (permalink) |
| Newbie  Join Date: Feb 2007
Posts: 23
| the tombstone on the inside is too small as I am sure you have figured out. I moded my x7 buy drilling out the old treads and putting new ones in. then you will need to find an ASA and a fitting that would conect it to the marker. I did not do anything like that I just put in some fittings so i could go with my remote line good luck, I would try Noxx55
__________________ Team Adrenaline Rush |
|
| |
|
01-10-2008, 09:38 AM
| #6 (permalink) | |
| Active Member Join Date: Jan 2008 Location: So-Cal
Posts: 200
| I drew up the part I needed in solidworks, but now I'm thinking of going a different direction. Thanks to all who replied. 
__________________ Quote:
Feedback:http://www.mcarterbrown.com/forums/f...-feedback.html | |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
