Sl-68 II missing hammer

deathblade · 07-14-2008, 11:27 PM

I lent my marker to my brother and he took it apart and lost the hammer and sear. I need some pics and measurements so that I can get another machined. I already contacted tippmann and they will not help.

blair_heavenwood · 07-28-2008, 10:10 PM

You may be better off buying another sl-68. It may be cheaper than machining new parts. There are a couple on Ebay right now.

pecoto · 07-28-2008, 10:28 PM

Post a message on the "wanted" section of this board....these things were produced by the thousands so there are a lot of parts out there. I would bet that someone on this board has what you need and would probably part with it fairly cheaply. If not, at least you tried.

blair_heavenwood · 07-29-2008, 01:25 AM

Good call Pecoto.

deathblade · 07-30-2008, 07:40 PM

my buddy is a machinist so the cost isnt gonna be much

BigOldSkool · 07-30-2008, 09:36 PM

Fyi.. I have some NOS hammers..

Fakename76 · 07-31-2008, 09:05 PM

Try this site out, see if it is there.

Products

deathblade · 08-13-2008, 11:50 PM

thanx. RC website says they have some. some pics and measurements would still be appreciated. What is a NOS hammer?

blair_heavenwood · 08-17-2008, 08:57 PM

Quote:

Originally Posted by deathblade

thanx. RC website says they have some. some pics and measurements would still be appreciated. What is a NOS hammer?

NOS=New Old Stock, basically unused original parts, not aftermarket.

07-14-2008, 11:27 PM	#1 (permalink)
deathblade Newbie Join Date: Jul 2008 Posts: 4	Sl-68 II missing hammer I lent my marker to my brother and he took it apart and lost the hammer and sear. I need some pics and measurements so that I can get another machined. I already contacted tippmann and they will not help.

07-28-2008, 10:10 PM	#2 (permalink)
blair_heavenwood Newbie Join Date: Jul 2008 Location: San Diego Posts: 22	replacement parts You may be better off buying another sl-68. It may be cheaper than machining new parts. There are a couple on Ebay right now.

07-30-2008, 09:36 PM	#6 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY Posts: 1,733	Fyi.. I have some NOS hammers.. __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-28-2008, 10:28 PM	#3 (permalink)
pecoto Rec Poster Join Date: Apr 2006 Posts: 69	Post a message on the "wanted" section of this board....these things were produced by the thousands so there are a lot of parts out there. I would bet that someone on this board has what you need and would probably part with it fairly cheaply. If not, at least you tried.

07-29-2008, 01:25 AM	#4 (permalink)
blair_heavenwood Newbie Join Date: Jul 2008 Location: San Diego Posts: 22	Good call Pecoto.

07-30-2008, 07:40 PM	#5 (permalink)
deathblade Newbie Join Date: Jul 2008 Posts: 4	my buddy is a machinist so the cost isnt gonna be much

07-31-2008, 09:05 PM	#7 (permalink)
Fakename76 Newbie Join Date: May 2008 Posts: 6	Try this site out, see if it is there. Products

08-13-2008, 11:50 PM	#8 (permalink)
deathblade Newbie Join Date: Jul 2008 Posts: 4	thanx. RC website says they have some. some pics and measurements would still be appreciated. What is a NOS hammer?