Paintball

[AmericanPaintball]

Ok ladies and gents.... after many years of slow progress I have finally finished the Stock Class SL-68 II Conversions. These will be forsale when completed, but mind you their will be quite a price on them. I am still working on the prices as I am trying to be reasonable, but yet not come up short on my end. Also I want to state that these were used Guns and will have some used parts when they are sold, but those of you who use SL's know that their parts are extremely well designed so should last quite a while.

First of all I want to thank Ken from KP Customs for all his handy work for helping me get these from where they were to where they are now. I give him much kudos for his craftsmanship, Thank you Ken

When designing these I wanted to keep the end user in mind for versability of setting up for individual desires. A few of the Key features are below.
Stock Class Setup for Horizontal Phantom feed, forward or rear facing feed tube
Vertical Feed Impulse threaded feed neck
Quick Change can either be setup in the stock ASA, or through the rear of the receiver with a plug in the ASA, or setup as a Vertical Air setup with Q/C or 3.5 oz tank.

Here is the first Picture of a finished basic model, this paticular setup is a 15 round phantom tube with rear receiver Quick Change



Next up is a 10 round phantom tube in the rear feed tube setup, and quick change in the stock ASA.



and last setup is incomplete but will be a SL-68 VSC, having a phantom 15 round feed, standard valve setup, but with a Vertical Air setup attached with a phantom line kit as pictured on my prototype.


and this is what the Air line will look like.


This is setup with a Vertical Hopper setup


Again these are just some examples of the setups that can be used with this marker. Feel free to post comments or questions.

[AmericanPaintball]

added more pics

[xkpxfatassxx]

Woah, these are cool!

[hank_k]

The VSC model is awesome .. I fear I may have yet another item on the "to buy" list.

[Titus]

As an SL hoarder and lover, I love the work done with these!

[Ir0nExpress]

My question: How much?

[AmericanPaintball]

price will totally depend on the setup you are looking for. I would love to get more then I have into them, but unfortunately sometimes we need to cut our losses. Below is the prices I have invested in them.

Used SL-68 II - $50.00
Milling off elbow, and setup for vertical Adapter - $75.00
Feedblocks - $90.00
CCI Custom Changers - $40.00
Powder Coating - $15.00
CCI Stock Class Block - $15.00
so this would be a basic setup with rear quick change and using a standard 10 round tube, and your looking at $285 invested to that point. Other features obviously will cost more. For the phantom feed your looking at $15, for the Vertical Kit you'd be looking at about an additional $60 with machining and parts.

I know that is a bit pricey, unfortunately thats the costs I am paying. Let me know if anyone is interested as I have 4 that our forsale, if you chose the vertical setup I will have to take to the local machine shop and might take an extra week.

[MrBig]

I have seen these in person. They are nice looking guns. An excellent concept!

[tucky]

could you do the first setup w/ a dropout changer instead of a quick change

[himurax13]

Brilliant !!