|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
08-25-2008, 01:40 AM
| #1 (permalink) |
| Newbie  Join Date: Aug 2008 | X7 electronic help. After playing with my X7 today in the rain for about half an hour it just stopped working. I would turn my egrip on and it would be solid green for about 10 seconds and then just changes to solid red and stays that way. It wont even make the click sound when you pull the trigger. I brought it into the staging area and it was working fine until i set it down on the bench and it clicked twice and the egrip went red. I was using a relatively new battery and compressed air and i just cant figure out why it wont work. |
|  |
|
08-25-2008, 02:54 AM
| #2 (permalink) | |
| Active Member  Join Date: May 2008 | Rain+Electronics=Bad Open it up dry it down (very carefully, use a soft soft towel) then leave everything to air dry. Disconnect the battery, test the voltage. Buy a new battery just in case. But I have a nasty feeling your solenoid is blown, when it doesn't click that means something is wrong. Good luck, Arpie
__________________ I am become death, the destroyer of worlds. J. Robert Oppenheimer The only thing necessary for the triumph of evil is for good men to do nothing. -Edmund Burke I'm waiting till 2019 when SP's monopoly over electronics finally ends! Quote:
| |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
