mcarterbrown.com
 

TJD Customs TJD Customs

Reply
 
Thread Tools Search this Thread
Old 01-23-2013, 09:04 PM   #51 (permalink)
Hesperia,ca
 
river031403's Avatar
 
Join Date: Feb 2012

Looks good. Side angle picture looks like rod is bent
river031403 is offline   Reply With Quote
Old 01-23-2013, 09:12 PM   #52 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

I dont know why but this rod likes to sit that way its not touching the body and seams pretty centered in the body groove so I have been calling it a win for now and I am waiting to see what the ccm rod is going to look like.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 01-23-2013, 09:14 PM   #53 (permalink)
Hesperia,ca
 
river031403's Avatar
 
Join Date: Feb 2012

Did you mic the rod see if its not straight?
Set rod on roller bearings mic over the ends and center maybe?
river031403 is offline   Reply With Quote
Old 01-23-2013, 09:19 PM   #54 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

I could do that but it sounds like a lot of work for a temporary stand in and its cold out in the shop
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 01-24-2013, 07:59 PM   #55 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

Guess what came in today

http://www.youtube.com/watch?v=fcOoqhdbIBA
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 01-24-2013, 08:39 PM   #56 (permalink)
Waiting on GoD.
 
D3adpool's Avatar
 
Join Date: Aug 2010
Location: NYC

CCM Fan
AKA Fan
Freaking awesome. Guess what my next 3 questions are going to be?
D3adpool is offline   Reply With Quote
Old 01-24-2013, 10:25 PM   #57 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

go ahead ask em'
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 01-24-2013, 10:59 PM   #58 (permalink)
MCB Member
 
big jim's Avatar
 
Join Date: Sep 2006
Location: Holdrege Nebraska

bet two of them are how much and how soon.
__________________
Big Jim

Quote:
Originally Posted by Mr. Furious View Post
You'll have a tough time finding a nicer group of people on the internet(even if our opinions all suck).

Quote:
Originally Posted by Vitalsilence View Post
I've dealt with canadians several times and I usually undercharge by 2-5 dollars cause I feel bad for them sometimes. Just my 2cents.

feedback http://www.mcarterbrown.com/forums/f...k-big-jim.html
big jim is offline   Reply With Quote
Old 01-25-2013, 01:14 AM   #59 (permalink)
Waiting on GoD.
 
D3adpool's Avatar
 
Join Date: Aug 2010
Location: NYC

CCM Fan
AKA Fan
^ lmao and how can I get on the list????!!!!
D3adpool is offline   Reply With Quote
Old 01-29-2013, 10:40 PM   #60 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

So after some testing it seams it was kinda touchy about short stroking. So I tore back into it today and tried to see what was wrong. turns out that the disc springs that run the reg are starting to break in I have run an entire 68/45 just thru the 3 way so I added some disc springs back up to what my original math suggested. Then I put some good lube on it rather than the oil that was on it before. with those 2 issues resolved I turned my attention to timing. I spaced out the auto trigger timing to reduce its sensitivity. I also thought since I had it apart and it looks like I need to have a rotor on it I should upgrade the detent system. I aligned the body in the mill to the original detent and drilled and tapped it for another detent. so now it has dual detents. I then put everything back together and shot 4 hoppers of paint thru it no breaks no short stroking issues and that was at about maybe 5-7 bps when I tried firing as fast as I could from the hip I had it hiccup once and break a ball in the barrel but no more breach breaks.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Airsmiths on MCB » TJD Customs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:43 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC