Tribal parts?

idkfa · 01-28-2010, 07:27 PM

I will probably be getting a Tribal, sooner rather than later I hope, and I am curious as to where you can get spare parts/seals. I know there is devoted 3rd party support with Edwin, Warped, and ASP, but I have yet to see a repair kit.

Anyone?

MaD · 01-28-2010, 07:38 PM

I don't think there was ever a repair kit. Yes, use Haveblue and the folks at TOG for parts and support. They have the majority of the leftover stock, replacement parts and custom parts. As far as o-rings, there really aren't that many and I believe most were pretty standard sizes (there might even be a reference somewhere). The noid wasn't exclusive to that gun and can still be found if you know where to look.

I do have a few parts myself so I'd say if you are looking for something specific just post a WTB.

infamoussmiley · 02-05-2010, 04:44 PM

has anyone t boarded a tribal? what kind of Universal t board is best?

Smiley

Have Blue · 02-05-2010, 08:19 PM

I had a seal kit on the site, but apparently it disappeared after one of the server migrations. I still have all the o-rings and can toss together a kit if you wind up needing one. Thankfully all the o-rings are standard dash sizes.

Spitlebug · 02-05-2010, 10:13 PM

Edwin has some good stuff too.

Tribal-Paintball Products by Edwin H.

01-28-2010, 07:27 PM	#1 (permalink)
idkfa Stock Class Aficionado Join Date: Mar 2007 Location: Vancouver, BC, Canada	Tribal parts? I will probably be getting a Tribal, sooner rather than later I hope, and I am curious as to where you can get spare parts/seals. I know there is devoted 3rd party support with Edwin, Warped, and ASP, but I have yet to see a repair kit. Anyone? __________________ MCB Feedback The PhOG Feedback eBay Feedback Newfoundland Paintball Supply

01-28-2010, 07:38 PM	#2 (permalink)
MaD MCB Member Join Date: Oct 2007 Location: A2, Michigan	I don't think there was ever a repair kit. Yes, use Haveblue and the folks at TOG for parts and support. They have the majority of the leftover stock, replacement parts and custom parts. As far as o-rings, there really aren't that many and I believe most were pretty standard sizes (there might even be a reference somewhere). The noid wasn't exclusive to that gun and can still be found if you know where to look. I do have a few parts myself so I'd say if you are looking for something specific just post a WTB. __________________ -= MaD =- Sheridan Seals and Parts Feedback DIY Paintball Stuff! Note: While I would love to take credit for his work, I am not associated with Mad Customs! You can contact BigMatt-MadCustoms in his MCB forum

02-05-2010, 08:19 PM	#4 (permalink)
Have Blue Cataclysmic and Prolific Join Date: May 2006 Location: Milwaukee, WI	I had a seal kit on the site, but apparently it disappeared after one of the server migrations. I still have all the o-rings and can toss together a kit if you wind up needing one. Thankfully all the o-rings are standard dash sizes. __________________ Air Soldier Products

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-05-2010, 04:44 PM	#3 (permalink)
infamoussmiley . Join Date: May 2006	has anyone t boarded a tribal? what kind of Universal t board is best? Smiley

02-05-2010, 10:13 PM	#5 (permalink)
Spitlebug No, just no. Join Date: Sep 2006 Location: Campbell River, B.C.	Edwin has some good stuff too. Tribal-Paintball Products by Edwin H.