Museum

[ranger steve]

Originally Posted by chplnstone

had him make me a bulk fill adapter for my k2, a measurement was off (based on his kp3) so it wouldn't work, he passed before i could send it back for tweeking, still haven't had the heart to fix it myself

I would love to see a picture of that... Anyway you could post a few on here?

[Phoenix01]

Cooper-T on/off ASA with air bleed



In the following picture you have two Cooper-T vertical expansion chambers, on the top is a standard one and on the bottom is for an Automag.

[chplnstone]

Originally Posted by ranger steve

I would love to see a picture of that... Anyway you could post a few on here?

here's a bad lighting pic of some more cooper-t stuff...



bulk air adapter is on the left, long rod with a one-way valve built into the elbow, no venting, have to shoot it down... rod's too short for a kp2, and it doesn't allow for the vent hole under the pump handle, pretty simple to fix. also a tank expansion chamber adapter, red and backspin bolts for long p-series and k, push tank on/off valves, backbottle adapters, and a mystery on/off tank valve (red handle, no idea if it's his or not, has fitting for liquid tube)



closeup of tank expansion chamber adapter



closeup of rva backbottle, this one was milled/drilled slightly out-of-true from flat on the side, like stock backbottle adapters were

[burscott]

I always wanted to try one of those better bolts. Anybody have good luck with them?

I have one of his expansion chamber kits on a Mag. Uses a vert mount 3.5 oz tank, and then goes to an ASA with possibly an on/off bleed.

I've never messed with it too much since when I do use that gun it's with a remote that has it's own on/off bleed...

Great thread, I'll try to get a pic up soon!

NO ONES MENTIONED HIS PEST CONTROL PRODUCTS!

[big jim]

Burscott,
I have a couple of the better bolts for the back spin. Usually use them with the IMP kits on PMIs and PGPs. They definitely do add at least 100 feet of range, I would say more. The ball flys out to about where you would expect it to drop, and just when it starts to drop it seems to jump about 2-3 feet in altitude and carry's on. Accuracy does suffer though. I also have a back bottle adapter or two, the expansion chamber with the 3.5 ox bottle, a couple of IMP kits and a PMI bolt or two around. At one time I had a couple of PMI 3s that I had put his maximizer kits in and they were great! Greatly reduced the kick and gave the added range of the better bolt. I have long since sold the guns and now would like to find another maximizer kit to purchase for my new to me VM.
I am in Columbus now so some day I should get one of the IMPs running and I could show it to you at CJ's.

[doc Zox]

anyone have the bleed to fill?

i always wanted one for nerf launching

[infamoussmiley]

[ranger steve]

Interesting stuff guys. Keep the photos and information coming.

[chplnstone]

white vm bolt on stock hammer



undershot bolts installed in primaries, i've noticed that some have retaining screws, some don't (top has one, bottom two don't)

[big jim]

Originally Posted by infamoussmiley

http://i76.photobucket.com/albums/j9...y/IMG_3009.jpg

http://i76.photobucket.com/albums/j9...y/IMG_3008.jpg

$$??