Rollouts

cory101 · 05-09-2010, 02:29 PM

im having a big problem with rollouts the paint my field uses wont get stoped by the fingers most of the time ate there any ideas i was thinking of drilling and tapping the body for cocker detents

HP_Lovecraft · 05-09-2010, 06:02 PM

There was a discussion a while back that it would be pretty trivial to make some homemade detents.

That might be your best option, as I think the body of the VM is way too thick for a traditional cocker detent to be utilized.

This is the quicky drawing I made for a homebrew detent. Really should not cost anything in parts if you already have some bits and pieces laying around:

05-09-2010, 02:29 PM	#1 (permalink)
cory101 Active Member Join Date: Apr 2008 Location: warrenville IL	Rollouts im having a big problem with rollouts the paint my field uses wont get stoped by the fingers most of the time ate there any ideas i was thinking of drilling and tapping the body for cocker detents __________________ I AM THAT FAT GUY AND THAT IS MY CUPCAKE http://www.mcarterbrown.com/forums/f...-feedback.html <Stripes> teh womenz, I dun understand tem!

05-09-2010, 06:02 PM	#2 (permalink)
HP_Lovecraft MCB Member Join Date: Aug 2006 Location: Southern Maine	There was a discussion a while back that it would be pretty trivial to make some homemade detents. That might be your best option, as I think the body of the VM is way too thick for a traditional cocker detent to be utilized. This is the quicky drawing I made for a homebrew detent. Really should not cost anything in parts if you already have some bits and pieces laying around: __________________ www.montneel.com "the evidence strongly suggests that neither Billy nor Adam (Smart Parts) could have invented the electronic paintgun" -Garr M. King, U.S. Judge

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search