|
             |
 |
|
| VM Empire Where the VM-68's and PMI-3 Come out to play |
 |
| | LinkBack | Thread Tools | Search this Thread |
10-16-2010, 03:19 PM
| #1 (permalink) |
| Est. 189£  Join Date: Mar 2009 Location: Ajax, ON | Recocking Problem
My VM has a few issues. I've used HPA on it with no problems in the past, but lately it's been shooting low. Then this time when I decided to bring it along with me and try and get it up to speed it would shoot fine once, but not recock. Does anyone out there know what I might have done wrong?,
__________________  |
|  |
|
10-17-2010, 12:10 AM
| #2 (permalink) |
| I'm on a boat!  Join Date: Apr 2006 Location: I'm on a boat!   |
Check the trigger sear for wear. Also, make sure the velocity adjustment isn't pinching the o-ring against the bore (the velocity adjuster has "clicks" at half turns, if it's between clicks it will stick in the bore, causing low velocity and failed recocking).
__________________ Two wrongs is a u-turn. It takes THREE wrongs to make a right. |
|
| |
|
10-20-2010, 12:27 AM
| #3 (permalink) |
| Active Member  Join Date: Jul 2007 |
Check out this step by step see if it helps any Recocking issues |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
