|
             |
 |
|
| VM Empire Where the VM-68's and PMI-3 Come out to play |
 |
| | LinkBack | Thread Tools | Search this Thread |
07-16-2012, 10:17 PM
| #1 (permalink) |
| MCB Member  Join Date: Jul 2006 Location: Deer Park, NY     | Yay I got a VMX....boo I can't get it to function!
Okay run down is no matter what I do the gun still chatters, and is unable to fully blow the hammer back to engage the sear again. - Tried all the bolts I have. - Tried all the hammers I have - Tried new hammer orings - Tried a different sear - Tried various valve combos - Lubed and cleaned. - N2 at 850,standard co2 and even liquid CO2. Am I missing the obvious?
__________________  RIP - Ed "BigDaddy" Roth and "Indian" Larry Wild Geese - Coney Isand White Fish - ECA BOS's Feedback! What Serial Number Is Your Cocker? WTB ECAP - "Making players dreams other players nightmares" COUSINS PAINTBALL |
|  |
|
07-17-2012, 09:59 PM
| #3 (permalink) |
| MCB Member Join Date: Jul 2006 Location: Deer Park, NY |
Bleh... what was miss machined about it? Either way it was cheap enough that dgaf.
__________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry Wild Geese - Coney Isand White Fish - ECA BOS's Feedback! What Serial Number Is Your Cocker? WTB ECAP - "Making players dreams other players nightmares" COUSINS PAINTBALL |
|
| |
|
07-18-2012, 09:50 AM
| #5 (permalink) |
| . Join Date: May 2006 |
Re: the mismachine stuff, the I.D. tolerance of where the hammer oring seals up is too big. you have to run liquid CO2 or high pressure Air at 800+ psi. Or it could be that your hammer oring is turning to tar like everyone elses and it just aint doing the job of sealing. This is what's happening to us. Smiley |
| |
|
07-18-2012, 05:29 PM
| #6 (permalink) |
| MCB Member Join Date: Jul 2006 Location: Deer Park, NY |
Going to try a larger oring and go from there..
__________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry Wild Geese - Coney Isand White Fish - ECA BOS's Feedback! What Serial Number Is Your Cocker? WTB ECAP - "Making players dreams other players nightmares" COUSINS PAINTBALL |
|
| |
|
07-21-2012, 10:32 PM
| #8 (permalink) |
| MCB Member Join Date: Jul 2006 Location: Deer Park, NY |
Out look is grim..... I can not get it to recock no matter what... tried bigger a oring on the hammer tried smaller valve stems. Tried liquid co2 even and it shot sometimes but not all the time. Meh... it was cheap enough that Ill keep it around cause it looks neat
__________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry Wild Geese - Coney Isand White Fish - ECA BOS's Feedback! What Serial Number Is Your Cocker? WTB ECAP - "Making players dreams other players nightmares" COUSINS PAINTBALL |
|
| |
|
08-11-2012, 01:20 AM
| #9 (permalink) |
| MCB Member Join Date: Jul 2006 Location: Deer Park, NY |
She isn't coming back from the dead  Such a shame... so young so pretty. I tried EVERYTHING! All I managed to do was waste co2, and get it to shoot once and a while but if you hold the trigger to long it goes full auto. Tried several trigger groups with the same result too. 
__________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry Wild Geese - Coney Isand White Fish - ECA BOS's Feedback! What Serial Number Is Your Cocker? WTB ECAP - "Making players dreams other players nightmares" COUSINS PAINTBALL |
|
| |
|
08-11-2012, 09:45 AM
| #10 (permalink) |
| MCB Member  Join Date: Jul 2006 Location: Coventry R.I. |
If you want to send it to me I'll take a whack at it, all you've got to lose is the shipping cost. David C. Burns Capital Paintball 853 Tiogue Ave Coventry R.I. 02816 401-823-5402 Capital Paintball RI |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
