safety ball bearing

Omegara · 10-12-2007, 09:05 PM

Does anyone know the size of the ball bearing in the safety mechanism? Just on the off chance I can find one at a hardware store I need a size.

Omegara · 10-16-2007, 08:14 PM

Just in case anyone wants to know for future reference the size of the little ball bearing in the safety is 3/32".

poseidon · 10-25-2007, 07:56 PM

I replaced mine with the ball and spring that is in a grease fitting. Most any hardware/automotive store will have them. It was a little tricky getting it out with loosing it too but I managed.

Omegara · 10-26-2007, 12:52 PM

I wound up getting them from 2 places, so now I have over 100 of them lol. I got them from Mass Extinction paintball and McMaster Carr.

10-12-2007, 09:05 PM	#1 (permalink)
Omegara Rec Poster Join Date: Sep 2007 Location: New Jersey! Posts: 86	safety ball bearing Does anyone know the size of the ball bearing in the safety mechanism? Just on the off chance I can find one at a hardware store I need a size. __________________ Omega Ra Spyder Pilot ACS DH titanium striker, 32* spring kit, Dye hyper 3 reg, ccm no-rise feedneck, X-customs Hall FX kit & NV trigger, ACP bolt, trinity 15* frontblock, NDZ asa/rail, SP all american barrel, T-board Ver C, 32* mangaport valve & pin, blue laser eyes, trinity grips, dye membrane pad Originally posted by OneUp: the reason I rock a spyder is because I have a big enough **** to not need even a $300 gun to compensate, let alone a $1000 gun....

10-16-2007, 08:14 PM	#2 (permalink)
Omegara Rec Poster Join Date: Sep 2007 Location: New Jersey! Posts: 86	figured it out Just in case anyone wants to know for future reference the size of the little ball bearing in the safety is 3/32". __________________ Omega Ra Spyder Pilot ACS DH titanium striker, 32* spring kit, Dye hyper 3 reg, ccm no-rise feedneck, X-customs Hall FX kit & NV trigger, ACP bolt, trinity 15* frontblock, NDZ asa/rail, SP all american barrel, T-board Ver C, 32* mangaport valve & pin, blue laser eyes, trinity grips, dye membrane pad Originally posted by OneUp: the reason I rock a spyder is because I have a big enough **** to not need even a $300 gun to compensate, let alone a $1000 gun....

10-26-2007, 12:52 PM	#4 (permalink)
Omegara Rec Poster Join Date: Sep 2007 Location: New Jersey! Posts: 86	. I wound up getting them from 2 places, so now I have over 100 of them lol. I got them from Mass Extinction paintball and McMaster Carr. __________________ Omega Ra Spyder Pilot ACS DH titanium striker, 32* spring kit, Dye hyper 3 reg, ccm no-rise feedneck, X-customs Hall FX kit & NV trigger, ACP bolt, trinity 15* frontblock, NDZ asa/rail, SP all american barrel, T-board Ver C, 32* mangaport valve & pin, blue laser eyes, trinity grips, dye membrane pad Originally posted by OneUp: the reason I rock a spyder is because I have a big enough **** to not need even a $300 gun to compensate, let alone a $1000 gun....

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-25-2007, 07:56 PM	#3 (permalink)
poseidon Newbie Join Date: Aug 2007 Location: Corvallis, OR Posts: 5	I replaced mine with the ball and spring that is in a grease fitting. Most any hardware/automotive store will have them. It was a little tricky getting it out with loosing it too but I managed.