|
             |
 |
|
| VM Empire Where the VM-68's and PMI-3 Come out to play |
 |
| | LinkBack | Thread Tools | Search this Thread |
11-11-2007, 01:51 PM
| #11 (permalink) |
| Rec Poster  Join Date: Sep 2007 Location: New Jersey!
Posts: 87
   | Well this only has cocking on one side and the feed neck only on one side as well. it's 000656 so it's an old one and I don't know too much other than that lol. Update: I got the velocity up to 240 fps by putting 2 spacers behind the spring on the hammer. My only other option (besides another spacer) is to drill the port between the valve and the hammer a little bigger to match the port in my valve. That should increase the velocity slightly too right?
__________________ Omega Ra Spyder Pilot ACS DH titanium striker, 32* spring kit, Dye hyper 3 reg, ccm no-rise feedneck, X-customs Hall FX kit & NV trigger, ACP bolt, trinity 15* frontblock, NDZ asa/rail, SP all american barrel, T-board Ver C, 32* mangaport valve & pin, blue laser eyes, trinity grips, dye membrane pad Originally posted by OneUp: the reason I rock a spyder is because I have a big enough **** to not need even a $300 gun to compensate, let alone a $1000 gun.... Last edited by Omegara; 11-11-2007 at 04:58 PM. |
|  |
|
|
| Thread Tools | Search this Thread |
|
|
