|
             |
 |
|
| VM Empire Where the VM-68's and PMI-3 Come out to play |
 |
| | LinkBack | Thread Tools | Search this Thread |
08-13-2008, 03:51 PM
| #2 (permalink) | |
| Wookie D*ck  Join Date: Apr 2006 Location: Vancouver, BC |
If you're gutsy and have alot of air: remove valve side screws take everything you can out of the back of the VM press butt of gun into pillow screw tank into front air adapter BOOM! There's your valve! Getting it back in is just a matter of poking it in and aligning it with the screw holes on the side.
__________________ Quote:
 | |
|  |
|
08-13-2008, 03:53 PM
| #3 (permalink) |
| Red=Moderator  Join Date: Apr 2006 Location: Schen. NY |
Don't listen to Russ.... chuckle head. Get a 3/8" Course Thread Lag bolt from the hardware store.... cover most of the threads from the back forward with tape to protect the inside of the lower tube. Remove the hammer from the lower tube, screw the lag bolt in to the valve, then remove the small screws that are on the side of the lower tube. Pull straight back on the lag bolt and you will bring the valve with it. E |
|
| |
|
08-13-2008, 03:56 PM
| #4 (permalink) |
| Not a Furry  Join Date: Mar 2006 Location: HTown, Texas  |
or you can go to the hardware store and purchase a carriage bolt long enough to get in there and thread into the valve (I forget the thread pitch) to yank it. Slightly safer than blowing it out with CO2.
__________________ www.texaspumpandpistolgame.com Black Watch Scenario Paintball Team , MCB Feedback Carter's Commando Texas division  |
|
| |
|
08-13-2008, 03:56 PM
| #5 (permalink) | |
| Wookie D*ck Join Date: Apr 2006 Location: Vancouver, BC |
But yours doesn't go boom... as far as safety goes, that's why you do it into a pillow or blanket.
__________________ Quote:
| |
|
| |
|
08-13-2008, 04:03 PM
| #6 (permalink) |
| Not a Furry Join Date: Mar 2006 Location: HTown, Texas |
I have had a VM valve shot into my thigh under pressure and I highly recommend not doing things that go boom.
__________________ www.texaspumpandpistolgame.com Black Watch Scenario Paintball Team , MCB Feedback Carter's Commando Texas division |
|
| |
|
08-13-2008, 04:12 PM
| #7 (permalink) | |
| Wookie D*ck Join Date: Apr 2006 Location: Vancouver, BC |
Sounds like you mixed up the order of airing up and unscrewing the valve screws! 
__________________ Quote:
| |
|
| |
|
08-13-2008, 07:01 PM
| #8 (permalink) |
| Post Whore  Join Date: Apr 2006 Location: Orange County, CA |
Go to home depot and pick up the screw. It's only like $2. It'll save your life.
__________________  TheDude's Feedback MCB, bastion of rightwing intelligentsia and Canadian liberalism. |
|
| |
|
08-13-2008, 07:04 PM
| #9 (permalink) | |
| Wookie D*ck Join Date: Apr 2006 Location: Vancouver, BC |
Your LIFE! Holy hyperbole batman! I don't know what to say to that...
__________________ Quote:
| |
|
| |
|
08-13-2008, 11:09 PM
| #10 (permalink) | |
| Post Whore Join Date: Apr 2006 Location: Orange County, CA | Quote:
__________________ TheDude's Feedback MCB, bastion of rightwing intelligentsia and Canadian liberalism. | |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
