|
             |
 |
|
| VM Empire Where the VM-68's and PMI-3 Come out to play |
 |
| | LinkBack | Thread Tools | Search this Thread |
09-12-2008, 07:29 PM
| #1 (permalink) |
| . Join Date: May 2006 |  Palmer Cup seals are "popping"
hi, Why would Palmer's Dyna valve for the VM-68 have the seal pop from the brass pressing? Out of the 25 vm-68s that I just rebuilt, so far 6 have had the cupseal rubber wafer pop from the brass pressing with in the first 100 shots causing the gun to turn into a fire extinguisher  Smiley |
|  |
|
09-23-2008, 03:54 PM
| #4 (permalink) | |
| Cobra Paintball Fanatic  Join Date: Apr 2006 Location: Manning the controls of the weather dominator  |
Velcor's wrath?
__________________  Shoot first, check armband tape later.Quote:
| |
|
| |
|
10-22-2008, 11:36 AM
| #6 (permalink) |
| Passing through rider  Join Date: Mar 2006 Location: Finleyville, PA   |
Ive had that happen in a hurricane. Call the shop, if you have a bad batch, they should work with you. I was told it was an under warranty part, but your milage may vary.
__________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me.... ” - Dean Alfange |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
