VM68 Machinegunning Help - Page 2

Menace · 02-14-2009, 10:49 PM

Sears aren't impossible to get. Pro team products has them, I believe.

By the way, if the sears are badly rounded, you might also want to check the lower bolt for abnormal wear, just in case.

But definitely send the guy this way.

Trevorjk · 02-15-2009, 05:17 AM

the lower bolt was in almost brand new condition, perfectly straight edge with almost no wear marks at all. but the sears looked in very bad shape after a closer inspection.

also, thank you much for the links guys! i will fill the guy in on prices ect, and see which route he chooses. if anything some one here might have a fixer upper project on there hands

02-14-2009, 10:49 PM	#11 (permalink)
Menace Currently swamped Join Date: Oct 2008	Sears aren't impossible to get. Pro team products has them, I believe. By the way, if the sears are badly rounded, you might also want to check the lower bolt for abnormal wear, just in case. But definitely send the guy this way. __________________ "Dude. I'm pretty sure he's behind one of those bunkers over there." My Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-15-2009, 05:17 AM	#12 (permalink)
Trevorjk Seasoned Member Join Date: Feb 2007 Location: WI/IL	the lower bolt was in almost brand new condition, perfectly straight edge with almost no wear marks at all. but the sears looked in very bad shape after a closer inspection. also, thank you much for the links guys! i will fill the guy in on prices ect, and see which route he chooses. if anything some one here might have a fixer upper project on there hands