Paintball

[JuggerJazz]

I have been using a VM-68 for only a few weeks now (and absolutely loving every moment of it ) but I think I have learned almost everything I need to know about how to use it. I just have two questions;

1) I have seen quite a few pictures of VMs with the tank coming out of the back of the marker. I am assuming that it is a part that one can buy, so what would that part be and where could I get it if I wanted one?

(And the question that I should have had answered earlier...)

2) When I got the VM it came with a valve tool, but I can't figure out where it fits. Where does it go?

Also if there is anything else that I should know about please speek up

[angelpena]

First off post up some pics!

The Magnum was the model with the back bottle, I don't think you can modify yours easily, and it would be cheaper just to buy a magnum anyway, watch the f/s boards here....

I have a valve tool too and I have never used it, I think you use t to remove the valve from the body, and seems to me there is something about velocity adjustment too


Here is my beloved...

[angelpena]

ohh yeah look here too

www.vm68.com: VM-68

[JuggerJazz]

There is it

[HP_Lovecraft]

They used to make aftermarket backbottle adapters, along with vert adapters, 45-degree adapters, and assorted bottleline setups. Most VM owners, at one time or another, tries to attach 3-4 tanks at once.

Those backbottle adapters pop up once in a while here (ie Bacci, etc). You could rig one easily enough using a mag vert adapter (2-screw style), and bolt it to the rear plug.

The valve tool is used to remove, and adjust the valve. It has 4 "settings" used to alter FPS along with the bolt. Its such a hassle that people generally just leave at the highest setting, and adjust down via the bolt as needed.